D20419-80 Datasheet, PDF (118/386 Pages) ITT Industries – Military/Aerospace

MIL-C-38999 Series I Connectors
KJL
How To Order
Military Nomenclature
MS NUMBER SHELL STYLE
MS27466 - Wall Mounting Receptacle
MS27468 - Jam Nut Receptacle
MS27467 - Grounded Plug
MS27656 - Wall Mounting Receptacle (back
panel mounting)
MS27505 - Box Mounting Receptacle (back
panel) (Class E)
CLASS
E - Inactive for new design.
Superseded by Class T.
P - Environment - resistant with straight potting
cup accessories
T - Environment - ressistant with accessory
threads and teeth, except MS27505 (with-
out rear accessory) (Class T not applicable
to MS27505)
ITT Cannon Nomenclature
SERIES PERFIX
KJL - Series I-Scoop proof
SHELL STYLE
0 - Wall mounting receptacle
3 - Wall mounting receptacle (back panel
mounting)
5 - Box mounting receptacle (back panel
mounting)
6 - Straight plug, grounded
7 - Jam nut receptacle
CLASS
E - Inactive for new design.
Superseded by Class T.
F - Environment - resistant with strain relief ac-
cessory
P - Environment - resistant with straight pot-
ting cup accessory
T - Environment - resistant (without rear ac-
cessory) (Class T not applicable to KJL5)
MS NUMBER SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
ALTERNATE SHELL POSITION
SHELL SIZE
9, 11, 13, 15, 17, 19, 21, 23, and 25
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel
plate, -85˚F to +302˚F (-65˚C to
+150˚C)
B - Olive drab cadmium over electroless nickel
plate, -85˚F to +347˚F (-65˚C to
+175˚C)
F - Electroless nickel, -85˚F to +392˚F
(-65˚C to +200˚C)
CONTACT ARRANGEMENT
See pages 132 and 133.
SERIES PERFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
SHELL POSITION
LESS CONTACTS
NOTE: KJL supplied with exact complement of contacts.
SHELL SIZE
9,11,13,15,17,19,21,23 and 25
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel
plate, -85˚F to +302˚F (-65˚C to
+150˚C)
B - Olive drab cadmium over electroless nick-
el plate, -85˚F to +347˚F (-65˚C to
+ 175˚C)
N - Electroless nickel, -85˚F to +392˚F
(-65˚C to +200˚C)
MS27467 T 17 A 35 S A
CONTACT STYLE
P - Pin
S - Socket
*A - Less Pin Contact
*B - Less Socket Contact
See pages 296-298 for fiber Optic contacts.
*Used only when other than power contacts are to be installed (i.e.
shielded, thermocouple, etc.)
ALTERNATE SHELL POSITION
A,B,C, and D. (Not required for normal). See page
131.
Note: To order MS connectors less standard power
contacts, purchase order must state "Less
Contacts"
KJL 6 T 17 A 35 S N L
CONTACT ARRANGEMENT
See pages 132 and 133.
CONTACT STYLE
P - Pin
S - Socket
See pages 296-298 for FIber Optic Contacts.
ALTERNATE SHELL POSTION
N (normal), A, B, C, D. See page 131.
LESS CONTACTS
Use "L" when connectors are ordered less con-
tacts, sealing plugs and insertion/extraction tool
("L" is not stamped on connectors).
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
118