D20419-80 Datasheet, PDF (229/386 Pages) ITT Industries – Military/Aerospace

Standard Circular Connectors
CGE
These connectors are used to transmit very high
current at low voltage, as for example in the
electrical equipment of miltary land and sea-borne
vehicles and in industrial facilities. The connecotrs
meet the mating dimensions, mechanical features
and rear panel installation requirements of
VG 95234. Ultraflexible, shielded weld cables are
terminated to the connectors.
These high power connectors feature one contact in Contact retention is achieved by the two-piece
a two-piece rigid insulator. The aluminum shell has insulator which is fixed to the shell with a snap-in
a chromate finish over cadmium. The operating ring. This allows unlimited exchange of the crimp
temperature ranges from -55˚C to +125˚C contacts. The bayonet coupling assures fast
(-67˚F to +257˚F). The contacts of copper or coupling and uncoupling. Color-coded snap-in points
copper alloy with hard sliver finish are designed for indicate positive mating. Plugs and receptacles are
crimping or termination to solid copper conductors waterproof in mated conditions up to 1 bar (35 feet
with threaded bolts. The mechanical durability is a of water).
minimum of 500 mating cycles. The crimp contacts
accept wires per DIN 46438 (25-240 sq. mm).
Conector Design - CGE
Receptacle CGE2...B-04
O RING
SHELL
INSULATOR
CYLINDRICAL _CYLINDRICAL
CONTACT
CONTACT
FRONT SIDE
O RING
INSULATOR
CYLINDRICAL
CONTACT
REAR SIDE
SPRING
RING
Plug CGE6...B-03
SPRING INSULATOR
RING
REAR SIDE
SPRING
CONTACT _INSULATOR
O RING
FRONT SIDE
BARREL ASSEMBLY
How To Order - CGE
SERIES
CGE - ITT Cannon Prefix
SHELL STYLE
0 - Wall mounting receptacle with mounting
flange
1 - Cable connecting plug
2 - Box mounting receptacle with mounting
flange
6 - Straight plug
8 - 90˚ angle plug
CLASS
E - Environmental, class JP 07, according to
DIN 40050
SHELL SIZE
16 - 18 - 22 - 28 - 32
CONTACT ARRANGEMENT
16H2
18H5
22H9
28H15
32H24
- Shell size 16, 1 contact H2
- Shell size 18, 1 contact H5
- Shell size 22, 1 contact H9
- Shell size 28, 1 contact H15
- Shell size 32, 1 contact H24
SERIES
SHELL STYLE
CLASS
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT SIZE
CONTACT TYPE
ALTERNATE KEYWAY POLARIZATION
BAYONET COUPLING
MODIFICATION
CONTACT SIZE
H2 - 3 AWG
H5 - 0 AWG
H9 - 000 AWG
H15 - 250 MCM
H24 - 400 MCM
CONTACT TYPE
F - Spring contact
Z - Cylindrical contact
ALTERNATE KEYWAY POLARIZATION
Standard - 180˚
W
- 120˚
CGE 6 E 32 H 24 F W B * * *
BAYONET COUPLING
B
- Bayonet coupling
MODIFICATIONS
05
- Through holes in flange
03
- Adapter for heat shrink boots, met-
ric size crimp contact
04
- Rear panel mounting, four threaded
holes, metric size crimp contact
04-05 - Same as 04, however with four
thourgh holes
14
- shielded version, metric size crimp
contact
16
- Thread bolt termaination, front panel
mounting, 0-ring for sealing be-
tween wall and receptacle (only for
style CGE2EB)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
229