D20419-80 Datasheet, PDF (3/386 Pages) ITT Industries – Military/Aerospace

ARINC 600
How to Order
BKAD/E/F
CONNECTOR SERIES
CLASS
SHELL SIZE
CONNECTOR LAYOUT DESCRIPTION
SIZE 1 COAX INSERT MODIFIER
BOEING COAX MODIFIER
SHELL STYLE
CONNECTOR MOUNTING MODIFIER
POLARIZING POSITION
MODIFIER (Contact, Finish, Material)
* = For Polarizing Position greater then 99, add third digit.
CONNECTOR SERIES
BKA (Per ARINC 600)
CLASS
D - Non-environmental (rear release, crimp
contacts)
E - Environmental (rear release, crimp con-
tacts)
F - Non-environmental (front release, solder
and wrap post #22 contact, rear release
all others)
C - Same as E, except uses BKAD shells, and
Less 0 rings on plug side.
S - Environmental (0-ring is used to seal
between connector shell and insulators)
with rear release, crimp contacts.
T - Non-environmental connector using fil-
tered contacts (reference Cannon Phoe-
nix)
SHELL SIZE
1 - Max. contact capacity - 125
2 _- Max. contact capacity - 400
3 _{- Max. contact capacity - 800}
CONNECTOR LAYOUT DESCRIPTION
(See page 4)
SIZE 1 COAX INSERT MODIFIER
M - Connector contains modified 71W1 or
2W2 insert (four MTG screw hole loca-
tions and coaxial contact used in this
insert are interchangeable between dif-
ferent manufacturers
NOTE: A dash must be inserted whenever code does not apply.
BKA D 2 A234 M * 3 00 01 * F0
BOEING COAX MODIFIER
Boeing
Coax
Code
ITTC
Code
ITTC Coax Contacts Supplied
Plug Connector
Receptacle Connector
AA
Blank No Coax Supplied
No Coax Supplied
AB
B
349-0013-000
349-0014-000
AC
C
349-0015-000
AD
D
349-0013-000
349-0017-000
349-0016-000
349-0014-000
349-0002-000
AE
E
349-0015-000
349-0018-000
349-0016-000
349-0004-000
AF
F
349-0015-000
349-0017-000
349-0016-000
349-0002-000
SHELL STYLE
3 - Plug (rack side)
4 - Receptacle (box side)
CONNECTOR MOUNTING MODIFIER
00 - Standard design, .148 dia. holes
01 - With #6-32 ESNA (#12 NCFMA2-62) clinch
nuts (see chart)
Connector
Size
1
2
3
Number of Clinch Nuts
Plug
4
Receptacle
4
4
6
8
10
02 -
03 -
08 -
09 -
16 -
17 -
23 -
Size 1 receptacle only - less 3 printed circuit
board mounting lugs
With #4-40 ESNA (#22 NCFMA2-40) clinch
nuts (see chart)
Size 2 and 3 plug and receptacle only - with
#4-40 ESNA (#22 NCFMA2-40) clinch nuts
(all mounting holes)
Size 2 and 3 plug and receptacle only - with
#6-32 ESNA (#12 NCFMA2-62) clinch nuts
(all mounting holes)
Same as - 00 mounting modification except
with nickel finished shells .0008 - .0012 thick
with EMI grounding spring for plug shells and
supplied with non-environmental inserts.
Same as - 00 mounting modification except
with nickel finished shells .0008 - .0012 thick
with EMI grounding spring for plug shells and
supplied with environmental inserts not potted
into shell.
With floating eyelets (.048 min. radial float)
4 corner holes per connector.
Consult factory if other modifications are required
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
3