D20419-80 Datasheet, PDF (226/386 Pages) ITT Industries – Military/Aerospace

Standard Circular Connectors
CA-COM
CA-COM and CA-COM-B connectors meet the re-
quirements of MIL-C-5015. They were developed
especially for industrial usage. CA-COM series con-
nectors offer the same mounting dimensions and
contact arrangements as MIL-C-5015 and VG
95234 connectors.
CA-COM and CA-COM-B connectors are available
as:
- Wall mounting receptacle
- Cable connecting plug
- Box mounting receptacle
Plug straight
Plug 90˚
Wall mounting receptacles and cable connecting
plugs (straight and 90˚) are available with:
- Endbell with cable clamp
- Endbell for flex tubes
- Adapter combined for PG termination e.cc. to
DIN46320 and
- Adapter for heat shrink boots
ITT Cannon also provides you with appropriate
accessories like:
- Protective metal caps with sash chain
- Cable clamps
- Cable bushings
- Sealings gaskets
Advantages
• threaded coupling - CA-COM/bayonet coupling
- CA-COM-B
• mateable with MIL-C-5015 connectors
• solder or crimp contacts
• contact arrangements with 1 to 61 contacts
available
• wire size: 1.5mm²up to 50 mm ²
• aluminum alloy shells withstand great mechani-
cal strain
• surface protected by a nickel plating
• resilient insulator (Polychloroprene) for extreme
temperatures (from - 55˚ to + 125˚C)
• resistant against aggressive fluids like fuel, oil
etc.
• environmental - with adapter for PG termination
or heat shrink boots
• at least 500 mating cycles
• spray-water proof - CA-COM/waterproof (1 bar,
12 hours) - CA-COM-B (with modification - 44
which includes seal ring and grommet).
Performance and Material Specifications-CA-COM
MATERIALS
Shell
Contacts
Insulator and grommets
Aluminum alloy, nickel plated
Copper alloy, tin plated
Polychloroprene
ELECTRICAL
Rated Current
20˚C ambient temperature
Cotnact Size
Max. Rated Current ¹
16S/15S
22A
16/15
22A
12/25
41A
Other sizes, see Page 224
1 _{This applies only to the max. rated current for one contact. If}
several contacts in one arrangement are loaded with higher
current the specific heat and the ambient temperature may not
exceed +125˚C.
MECHANICAL
Max. operating temperature - 55/125˚C
Mating cycles
min. 500
How to Order-CA-COM
SERIES
CA - ITT Cannon designation
SHELL STYLE
00 - wall mounting receptacle
01 - cable connecting plug
02 - box mounting receptacle
20 - box mounting receptacle for rear mounting
(only bayonet version)
06 - straignt plug
08 - 90˚ plug
CLASS
COM-E - endbell with cable clamp
COM-F - endbell for flex tube
COM-PG - adapter for heat shrink boots and PG
termination, environmental
COM-L - solder termination for printed
circuits
SHELL SIZE
10SL, 12S, 14S, 16S, 16, 18,
20, 22, 24, 28, 32, 36
SERIES
SHELL STYLE
CLASS
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT TYPE
ALTERNATE INSERT POSITION
BAYONET COUPLING*
MODIFICATION
* Do not use for CA-COM with thread coupling
CONTACT ARRANGEMENT
See page 227
CONTACT TYPE
P - pin contact
S - socket contact
ALTERNATE INSERT POSITION
Insert positions of insulator, see page 228
COUPLING B
- with bayonet coupling
- without designation: with threaded coupling
CA 06 COM-E 18 - 1 P *
CA 06 COM-E 18 - 1 P *
***
B* * * *
MODIFICATION*
01 - metric crimp contacts
03 - adapter for heat shrink and metric crimp
contacts (Mod. for bayonet coupling)
06 - adapter for heat shrink and solder
contacts (Mod. for bayonet coupling)
DN - adapter for heat shrink boots solder
contacts (Mod. for bayonet coupling)
F80 - AWG crimp contacts
* All CA Bayonet connectors come with intalled solder
contacts unless a modification code is added to the part
number.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
226