D20419-80 Datasheet, PDF (348/386 Pages) ITT Industries – Military/Aerospace

Combo D® - Coaxial/50 Ohm
Cable Combinations - 50 Ohm Coaxial Contacts (Continued)
Right Angle Crimp Braid
D
Plug
Plug
Plug
Plug
Receptacle
Receptacle
Receptacle
Receptacle
C
A
B
Plug
Part Number
Gold Over Nickel
50µ in. Gold Over Copper
DM53741
DM53741-12
DM53741-1
DM53741-11
A
Max.
.530 (13.46)
.530 (13.46)
DM53741-3
DM53741-4
DM53743-2
DM53743-3
DM53741-10
DM53741-13
DM53743-18
DM53743-16
.530 (13.46)
.530 (13.46)
.530 (13.46)
.530 (13.46)
DM53743-5
DM53743-6
DM53743-17
DM53743-19
.530 (13.46)
.530 (13.46)
B
Ref.
.745 (18.92)
.745 (18.92)
.745 (18.92)
.745 (18.92)
.745 (18.92)
.745 (18.92)
.745 (18.92)
.745 (18.92)
Insertion/Extractoin Instructions
Coaxial, High Power and High Voltage Contacts
Insertion
No insertion tool is required. The contact is easily
snapped in from the rear of the connector.
RED COLOR CODED CONNECTOR
ACCEPTS PLUG CONTACS.
INSERT
PLUG CONTACT
D*M PLUG
(Dimensions include outer sleeve.)
Color Code: Receptacle - Blue; Plug - Red
D
C
C
.594 (15.10)
.594 (15.10)
.630 (16.00)
.630 (16.00)
.594 (15.10)
.594 (15.10)
.630 (16.00)
.630 (16.00)
B
Receptacle
D
+_ .005 (0.13)
.045 (1.14)
.072 (1.83)
.110 (2.79)
.125 (3.18)
.045 (1.14)
.072 (1.83)
.110 (2.79)
.125 (3.18)
RG Cable No.
Old
New
196/U
187/U
188/U
195/U
58/U
196/U
187/U
188/U
195/U
58/U
178B/U
179B/U
316B/U
180B/U
58B/U
178B/U
179B/U
316B/U
180B/U
58B/U
BLUE COLOR CODED CONNECTORS ACCEPTS RECEPTACLE
CONTACTS INSERT FROM TERMINAL END AS SHOWN BELOW.
INSERT
RECEPTACLE CONTACT
D*M RECEPTACLE
Extraction
CET-C6B
The CET-C6B tool extracts coaxial, high power and
high voltage contacts (Plug and receptacle).
Part number 070064-0000.
Operating Instructions:
To extract the coax contact, hold the tool by the
body and insert the tip into the front of the contact
cavity until it bottoms and closes the coax retaining
ring. Holding the body in this position securely
enough to keep coax retaining ring closed, push the
plunger; contact will be pushed out of the rear of
the assembly.
Hand Tool with intergral die set for all coax straight crimp braid. Part Number: 070051-0000 (CCT-DM)
TOOL PLUNGER
COAXIAL, H.V., OR
POWER CONTACTS
D*M PLUG
EXTRACT
TOOL TIP
EXTRACTION TOOL CET-C6B
See Commerical D Subminiature catalog for additional Combo D options, including 75 ohm Coax.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
348