D20419-80 Datasheet, PDF (102/386 Pages) ITT Industries – Military/Aerospace

Rack and Panel Connectors
Junction Shell, Assembly of
DPGM/DPJM/DPJMB
Slip junction shell over grommet and secure with
four screws and lock washers.
Panel Cutouts
33 and 34 Shell Styles
DPGM
C
A
.565 (14.35)
.559 (14.45)
2.004 (50.90)
1.996 (50.70)
D
.166 (4.22) R. TYP.
.146 (3.71)
B
.143 (3.63) DIA. TYP.
.141 (3.58)
DPGM-33
DPG-34
A
B
C
1.609(40.87)
1.599(40.61)
1.636(41.55)
1.626(41.30)
.985(25.02)
.975(24.76)
1.011(25.68)
1.001(25.42)
.214(5.44)
.204(5.18)
.227(5.76)
.217(5.51)
D
.203(5.16)
.193(4.90)
.190(4.83)
.180(4.57)
Gap Between
Flanges after mating
{ .500(12.70)
.625(15.88)
{ .500(12.70)
.625(15.88)
DPJM
DPJMB
.3.480 (88.39)*
3.470 (88.14) _{3.879 (98.53)}
.262 (6.85)
3.871 (98.32)
.252 (6.40)
1.105 (28.07)*
.217 (5.51) _{1.095 (27.81)}
.207 (5.26)
.565 (14.35)
.559 (14.45)
.166 (4.22) R. TYP.
.146 (3.71)
*These dimensions allow for float mounting.
.143 (3.63) DIA. TYP
.141 (3.58)
PANEL THICKNESS: Maximum sum of both panel thicknesses is 7/16 of an inch when 33 plug and 34
receptacle are back mounted. Shell style 33 modifications A and -2 can be back mounted ONLY. Shell
style 33 modifications B and shell style 34 modifications B and H may be front or back mounted
Consult factory for additional information.
Mounting Variations
33 Shell
6-32 NC-2 THD
SELF-LOCKING NUT
PANEL
6-32 NC-2 THD
SELF-LOCKING NUT
PLAIN HOLE
IN FLANGE
A
34 Shell
A-2
B
SHORTENED
6-32 NC-2 THD
SELF-LOCKING NUT
A
B
PLAIN HOLE
FLOAT MOUNTING
PANEL
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
102