D20419-80 Datasheet, PDF (69/386 Pages) ITT Industries – Military/Aerospace

DPX ARINC 404
Recommended Flange Spacing
A
PLUG CONNECTOR
-33
DPX
All tolerances are +_ .015 (0.38) unless otherwise noted.
RECEPTACLE
CONNECTOR
-34
Type Connector
DPXA
DPXB
DPX2-_B
DPX2
DPX2-_A
DPX3
DPX4
Dim. A (mm)
.622 (15.80)
.549 (13.94)
.365 (9.27)
.292 (7.42)
.365 (9.27)
.292 (7.42)
.633 (16.08)
.560 (14.22)
.633 (16.08)
.560 (14.22)
.365 (9.27)
.292 (7.42)
.365 (9.27)
.292 (7.42)
Comments
For both solder & crimp type contacts
For both solder & crimp type contacts
ARINC B Shell
ARINC A Shell for both solder & crimp type contacts
ARINC A Shell for both solder & crimp type contacts
For both solder & crimp type contacts
For both solder & crimp type contacts
1 _{Flange spacing required for NE/NA by MIL-C-81659 [.297/.281 (7.54/7.14)]}
2 _{For environmental ME with interfacial seal recommend flange spacing of [.321/.281 (8.15/7.14)]}
Panel Cutouts
DPXA
.125 (3.15)
RAD. TYP.
1.781 (45.24)
.750
(19.05)
1.140
(28.96)
12
12
2
12
12
DPXB
.120 (3.05) DIA.
4 HOLES
2.062 (52.38)
1.437
CL _OF
INSERT
(36.50)
.718
(18.24)
CL
1.720
(43.70)
.720
(18.29)
.120 (3.05) DIA.
4 HOLES
1.720
(43.69)
- 33 Front Mount
1.350
(34.30)
.561
(14.25)
.125 R. TYP.
(3.18)
NOTE - WHEN USING THE -2301 FLOATING EYELET
MODIFICATION, ADD .050 (1.27) TO THE CUTOUT
SIZE TO ALLOW FOR FLOAT (EXCEPTION -34A)
1.720
(43.70)
.720
(18.29)
1.437
(36.50)
CL
.718
(18.24) _{CL OF INSERT}
.580
(14.73)
1.440
(3.66)
1.25
(3.18)
1.78 (4.52)
- 33 Rear Mount
- 34 Rear Mount
- 34 Front Mount
.260 (6.60)
.120 (3.05) DIA.
4 HOLES
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
69