D20419-80 Datasheet, PDF (341/386 Pages) ITT Industries – Military/Aerospace

High Density D
Crimp
Printed Circuit
D*MA
(See page 342)
(See page 343)
Performance and Material Specifications
MATERIALS AND FINISHES
Shell
Insulator
Contact
Material
Steel per ASTM A-620
Diallyl phthalate glass-filled
per MIL-M-14, type SDG-F
color green
Copper alloy
Standard
Finish
Yellow chromate over cadmium
QQ-P-416 Type II Class 2
-
Gold over nickel
Float Mount Hardware Stainless steel
Passivate per QQ-P-35
Material
Steel per ASTM A-620
Diallyl phthalate glas-filled
per MIL-M-14, type SDG-F
color green
Copper alloy
Crimp socket has
stainless steel hood
Stainless steel
Military
Finish
Yellow chromate over cadmium
QQ-P-416 Type II Class 2
-
Gold 50 microinches minimum thicknes per
MIL-G-45204 Type II Grade C Class 1 over
copper per MIL-C-14550
Hood: Passivated
Passivate per QQ-P-35
PERFORMANCE SPECIFICATIONS
Wire Accommodation (AWG)
Crimp-#22-#28 AWG
Current Rating
#22: 5 Amp
Temperature Rating
-65˚C to +150˚C
Contact Resistance
55 @ 5 Amp
After Salt Spray, Millivolt Max.
test current
DIELECTRIC WITHSTANDING VOLTAGE
90˚ and Straight (Solder/Crimp)
Altitude (feet/m)
Sea Level
70,000/21,336
100,000
Test
1000
325
175
All voltage figures are rms AC 60 rms cps, measured at approximately +25˚C, 50% rh. For additional performance specifications refer to
MIL-C-24308 Test Extracts on page 385.
Contact Arrangements
Face View Pin Insert
1
Shell Size
Contact Arrangement
Contact Size
78
D
78
#22
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
341