D20419-80 Datasheet, PDF (82/386 Pages) ITT Industries – Military/Aerospace

MIL-C-83733
Pluge/Configurations (Socket Contacts)
Basic Plug
Shell Dimensions
1.158 ± .012
(29.41 ± 0.30)
.312 ± .010
(7.92 ± 0.25)
4 PLACES
SHELL SIZE
1 Junction shell and hardware are not supplied on -G131 and
-G185 layouts.
† See page 83 Style M and H
DPKA*S**
DPKB*S**
DPK Styles
Mounting Style A
.500 MAX.
(12.70)
.196 + .004 - .003 DIA.
(5.03 + 0.10 - 0.06)
2 HOLES
POLARIZING POST
2 REQD.
DPK/MIL-C-83733 TYPES
Mounting Style K - MIL-C-83733/4(USAF)
With Captive Springs
DPK
L
D
A
TYP.
C
B
.030 + .010 - .000R
(0.76 + 0.25 - 0)
4 PLACES
.562 ± .004
(14.28 ± 0.10)
.622 + .006 - .007
(15.80 + 0.20 - 0.18)
.780 ± .005
(19.81 ± 0.13)
.878 ± .005
(22.56 ± 0.13)
1.265 MAX.
(32.13)
1.010 MAX. (25.65)
1.002 +.008 - .017
(25.45 +_ 0.20 - 0.43)
.125 ± .010R.
(3.18 ± 0.25)
2 PLACES
.700 ± .010
(17.78 ± 0.25)
.111 + .008 - .007
(2.82 + 0.20 - 0.18)
JUNCTION SHELL
1
A
1.959 (49.76)
1.946 (49.43)
3.259 (82.78)
3.246 (82.45)
B
1.864 (47.35)
1.853 (47.07)
3.164 (80.37)
3.153 (80.09)
C
1.780 (45.21)
1.763 (44.78)
3.080 (78.23)
3.063 (77.80)
D
2.580 (65.53)
2.570 (65.28)
3.880 (96.52)
3.870 (98.30)
L
3.030 (76.96)
3.000 (76.20)
4.330 (109.98)
4.300 (109.22)
N
Staggered †
2.150 (54.61)
2.130 (54.10)
3.450 (87.63)
3.430 (87.12)
Mounting Spacing Dimensions
For Jackscrew Assemblies
THRUST WASHER
JACKSCREW
.040 (1.02) DIA.
WIRE HOLE SAFETY
CONNECTOR
305-0007-000
JACKSCREW ASSY
RETAINING RING
PLUG
CONNECTOR
.532 ± .008
(13.51 ± 0.20)
RECEPTACLE
CONNECTOR
PANEL (REF.)
Mounting Style X - MIL-C-83733/2(USAF)
With Guide Pins and Spring Mounting
.138 (3.50) - 32 UNC-2A
THREAD
.116 ± .080
(2.94 ± 2.03)
.390 MAX.
(9.91)
1.250 (31.75)MAX.
SPRING IN FREE
POSTION
NOTES: 1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 118 pounds minimum at .500 (12.70) panel spacing and 176
pounds maximum at .390 (9.91) panel spacing
.138 (3.50) -32 UNC-2B
THREAD
.190 (4.82) -24 UNC-2A
THREAD
.200 ± .002 DIA.
(5.08 ± 0.05)
31˚
29˚
1.370
(34.80)
MAX.
.116 ± .080 DIA.
(2.94 ± 2.03)
.190 (4.82) -32 UNF-2
NOTES: 1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 59 pounds minimum at .500 (12.70) panel spacing and 88
pounds maximum at .390 (9.91) panel spacing
3. This configuration must not be used on teh 131 or 185 contact layouts.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
82