D20419-80 Datasheet, PDF (140/386 Pages) ITT Industries – Military/Aerospace

MIL-C-26482 Series I Connectors
KPT/KPSE
Solder
Crimp
• General purpose
• Closed-entry socket contacts
• Solder termination
KPT connectors are a series of general - purpose,
environment - resistant, miniature circular connec-
tors, qualified for use in industrial applications
calling for quick - disconnect connectors with fixed
contacts
for
solder
termination.
These miniature circular connectors are grouped
into two series ranging from general purpose solder
pot connectors . . . to high performance, crimp con-
nectors . . . to connectors with high contact densi-
ty. This broad range provides the most complete
family of 26482 connectors available today. The
versatility of these connectors is proven by the
fulfillment of requuirements ranging from general
purpose to space environmental.
In addition to the two basic series, connectors for
special applications are also available. They include
RFI filtering versions (with loss pass internal filter
pin contacts), hermetic connectors for high pres-
sure watertight requirements, and twist - on pull - off
couplers for MIL-C-26482 plugs.
This series is intermateable and intermountable
with all MIL-C-26482 connectors, whether solder
or crimp type and is available with many materials,
finishers and configurations.
How to Order - KPT - Solder Contact Connectors
SERIES PREFIX
KPT - ITT Cannon prefix
MS - MIL-C-26482 prefix
SHELL STYLE
Cannon Designation
00 - wall mounting receptacle
01 - cable connecting plug
02 - box mounting receptacle (Class E only)
* ^{03 - wall mounting receptacle without grom-}
met, ferrule and endbell
* ^{04 - cable connecting plug without grommet,}
ferrule and endbell
* ^{05 - straight plug withoug grommet, ferrule,}
and endbell
06 - straight plug
07 - jam nut receptacle (available in hermetic
version also)
08 - 90˚ angle plug
B - thru-bulkhead receptacle (Class E only)
* Consult factory for details
SHELL STYLE (cont'd)
MS Designation
3110 - wall mounting receptacle
3111 - cable connecting plug
3112 - box mounting receptacle (Class E only)
3114 - jam nut receptacle
3116 - straight plug
3119 - thru-bulkhead receptacle (Class E only)
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT STYLE
ALTERNATE INSERT POSITION
MODIFICATION CODE
CLASS
A - general duty (not MS approved)
B - general duty with strain relief without
grommet & ferrules (may be used for pot-
ting when strain relief is desired) (not MS
approved)
E - grommet seal except on 02 and 3112 (MS
specification)
F - grommet seal with strain relief (MS specifi-
cation)
J - water tight gland seal with strain relief for
jacketed cable (MS specification)
P - potted (MS specification)
SHELL SIZE
8, 10, 12, 14, 16, 18, 20, 22, and 24
MS 3110 E 22 - 36 P Y
KPT 00 E 22 - 36 P Y **
CONTACT ARRANGEMENT
See contact arrangement page 149.
CONTACT STYLE
P - pin; S - socket
ALTERNATE INSERT POSITION
W, X, Y and Z. (Omit for normal.)
MODIFICATION CODE
Omit first (0) of shell style indication when using
modifications code.
07 - clear chromate over cadmium
16 - twist-pull lanyard release coupler (appli
cable to plug only).
23 - grounding springs fingers (applicable to
plug only)
How to Order - KPTB Thru-Bulkhead Receptacle Connectors
• General Purpose
• Double ended pin and socket contacts
• Contains KPT socket insert
• Nonremovable contacts
KPT connectors are a series of general - purpose,
miniature circular connectors, qualified for use in
military applications. Ther are also widely used in
industrial applications. The KPTB in a thru-bulkhead
version with double faced pin and socket insert
construction allowing mating from both ends. They
contain KPT socket inserts with feed-thru (pin/
socket) non-removable contacts.
The thru-bulkhead receptacle is provided for appli-
cations requiring the disconnnection of a power
source from either side of a panel. A typical
connector to be used if air leakage requirements
are critical.
KPTB 22 ^- 55 PS Y
SERIES PREFIX
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT STYLE (pin & socket)
ALTERNATE INSERT POSITION
MS3119 E 22 - 55 Y
MIL-C-26482 PREFIX
CLASS
SHELL SIZE
CONTACT ARRANGEMENT
ALTERNATE INSERT POSITION
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
140