D20419-80 Datasheet, PDF (64/386 Pages) ITT Industries – Military/Aerospace

DPX ARINC 404
DPX
Modifications Codes
DPXA Modifications Codes
- 4. Mounting holes .120 (3.05) dia. c'sink 100˚ to .225 (5.72) dia.
- 5. 4-40 clinch nuts.
- 6. Removable insert retainer plate.
- 7. Mounting holes .120 (3.05) dia. c'sink 82 to .230 (5.84) dia.
-12. Mounting holes .132 (3.35)/.125 (3.18).
-16. A106 insert with separator.
-17. With grommet and mounting holes .120 (3.05) dia. countersunk 100˚ to .225 (5.72) dia.
-70. Standard mounting with (LIF) contacts.
-77. Same as -7 except with low insertion force (LIF) contacts (for LIF contact data).
DPXB and DPX2/3/4 Modification Codes
Some of the modification numbers used in the DPX
lines apply to all types and some are applicable for
only certain types. The following chart gives the
modification number, the description, and the shell
Modification
Applicable Series
type in which they may be used (-33 is for plug
shells, -34 is for receptacle shells).
Definition
- 00**
DPX2-33 and 34
DPX2-33A
DPX2-33F and 34F
DPX2-33M and 34M
Standard construction, mounting holes .120 (3.05) dia.
and with tabs for junction shells.
- 00
DPX2-34A
Standard construction - six floating eyelets
and tabs for junction shells,
DESCRIBES STANDARD
CONNECTOR HOUSING
- 00
DPX2-33B
DPXB-33
DPX3-33
DPX4-33
Standard construction, mounting holes .120 (3.05) dia.
countersunk 82˚ to .230 (5.84) dia. - no tabs.
1
MODIFICATION 00
- 00
DPX2-34B
DPXB-34
DPX3-34
DPX4-34
1
Standard construction, mounting holes 120 (3.05) dia. - no tabs.
#4-40 CLINCH NUTS
- 01
DPX2-33 and 34
DPX2-33A
DPX2-34A
DPX2-33F and 34F
DPX2-33M-34M
Standard construction and with standard junction shells.
- 01
- 01
MODIFICATION 01
- 01
- 02
#4-40 THREAD
(2 TABS PER
RETAINING
PLATE)
- 02
MODIFICATION 02
ATTACHING TABS
- 02
ALTERNATE STYLE
MOUNTING HOLES
.120 (3.05) DIA.
C'SUNK 100 TO
.230 (5.84) DIA.
- 03
MODIFICATION 03
1 Applicable for all MA, ME, NA & NE Series Connectors.
1 Applicable to NE Series also.
DPX2-34B/33B
DPXB-34
DPX3-34
DPX4-34
DPX2-33 and 34
DPX2-33A
DPX2-34A
DPX2-33F and 34F
DPX2-33M and 34M
DPX2-33B and 34B
DPXB-33 and 34
DPX3-33 and 34
DPX4-33 and 34
DPXBME-33 and 34
DPX2ME-33 and 34
DPX3ME-33 and 34
DPX4ME-33 and 34
DPX2-33 and 34
DPX2-33A
DPX2-33F and 34F
DPX2-33M and 34M
DPXB-33 and 34
DPX3-33 and 34
DPX4-33 and 34
With four #4-40 clinch nuts in mounting holes.
1
With six #4-40 clinch nuts in mounting holes.
1
With ten #440 clinch nuts in mounting holes.
Standard construction and with 90˚ junction shells.
Standard construction and with tabs for attaching junction shells.
1
Standard construction and with tabs for attaching junction shells.
2
Mounting holes .120 (3.05) dia. countersunk 100˚ to .230(5.84) dia.
1
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
64