D20419-80 Datasheet, PDF (255/386 Pages) ITT Industries – Military/Aerospace

Miro-D Plastic Shell - .050" Contact Spacing
MD
Mounting Hardware Views (Sizes 9-51)
This hardware supplied unassembled.
Screw Lock Assembly
LOCK
SCREW
RETAINING
CLIP
MATING
FACE
#2-56 UNC-2B
.408 (10.36)
MAX.
.182 (4.62)
MAX.
.688 (17.48)
MAX.
CONNECTOR
SHOWN FOR
REF. ONLY
BUSHING
.185 (4.70) MAX.
PANEL REF. .500
(12.7)
MAX.
.093 (2.36)
RECOMMENDED
PANEL THICKNESS
.232 (5.89) MAX.
#2-56 UNC-2A
Jackpost - (P)
Screw Lock Assembly*
.052
(1.32) TYP.
90˚ Angle Mounting Bracket
.096 +_ .005
(2.44 +_ 0.13)DIA.
.170
(4.32) MAX.
.178 +_ .005
(4.52 +_ 0.13)
#2-56
UNC-2B
THD
.260
(6.60) MAX.
A
B
90˚ Angle Mounting Bracket
*NOTE: Torque value is 4.0 in/lbs max.
Description
Screw Lock Assembly
Jackpost Kit
Part Number
322-9500-000
320-9505-000
A
+_ .005 (0.13)
B
Max.
Mounting Bracket, 90˚ Angle-
MD*1
for 9 thru 37 Shell Sizes
015-9516-000
.100
(2.54)
.215
(5.46)
MD*1
for 51 Shell Size
015-9516-000
.122
(3.10)
.257
(6.53)
NOTES: Screw lock assembly (322-9500-000) can be used for front front mounting. Jackpost kit (320-9505-000) consists of 2 assemblies,
shipped unassembled.
This hardware is factory installed.
.014 +_ .004
(0.36 +_ 0.10) ALLOWABLE
DIAMETRAL FLOAT
.020 (0.51) MAX. ALLOWABLE
AXIAL FLOAT
.150 +_ .003
(3.81 +_ .076)
MATING
FACE
.185 (4.70)
MAX
.093
(2.36)
REF.
.090 +_ .0015
(2.29 +_ 0.038)DIA
Float Mount - (F)
.031 +_ .003
(0.79 +_ 0.08)
Shown here is a cutaway view of the float mount for the MD connector.
The basic shell dimensions are the same for the float mount and the
screw mounting hole configurations. Veiw shown is for standard float
mount front panel mounting. Reverse mounting is available on request.
CONNECTOR
SHOWN FOR
REF. ONLY
.490
(12.45) MAX
CONNECTOR
SHOWN FOR
REF ONLY
HEX HEAD -
.050 (1.27) ACROSS FLATS
.050 (1.27) DEEP (REF)
.155
(3.94) MAX.
MATING
FACE
#2-56
PART HAS A .040 (1.02)
UNC-2A MAX AXIAL FLOAT
Jackscrew - (K) Standard
MATING
FACE
PART HAS A .040 (1.02)
MAX. AXIAL FLOAT
#2-56
UNC-2A
Jackscrew - (L) Low Profile
* NOTE: Torque vales are as follows:
Low Profile Jackscrew (L)-2.5 in/lbs
Standard Jackscrew (K)-2.5 in/lbs
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
255