D20419-80 Datasheet, PDF (288/386 Pages) ITT Industries – Military/Aerospace

The Centi Line - .075" Contact Spacing
2D/CTA
Contacts
Contact Part Number
Part Number
Pin
Socket
Type
Pin
031-9540-000
030-9542-001 Standard 30µin. plating
The contacts are retained in the insulator by means
of a resilient internal shoulder that allows contact
to snap into a locking groove.
The front of the contact is chamfered so that the
internal shoulder in the insulator is not damaged as
the contact is pushed thru.
P.C. Tail Contacts
031-9540-004
031-9540-005
N/A
*031-9540-013
030-9542-002
030-9542-004
030-9542-011
030-9542-012
50µ in. plating
With inspection hole;
50µ in. plating
P.C. tail
.026 dia. x .083 lg. Soc.
P.C. tail
.183 lg. Soc.
.020 dia. x
.183 lg. Pin
Subtract .064 (1.63) +_ .010 (.25) from pigtail
length when used in 2D pin insulator for potting
well of connector assembly.
Subtract .081 (2.08) +_ .010 (.25) from pigtail
length when used in 2D socket insulator for
potting well of connector assembly.
031-9540-016
031-9540-022
***
031-9540-007
*031-9540-015
030-9542-014
030-9556-000
***
030-9542-022
030-9542-015
Long crimp
barrel **
Small crimp bore
For AWG #32 & 30
Small crimp bore
For AWG #28 & 30
P.C. tail
.232 lg. Soc.
.020 dia. x
.255 lg. Pin
*031-9540-019
030-9542-016
P.C. tail
.444 lg. Soc.
.018 dia. x
.445 lg. Pin
50µ in. plating
NOTE: Plating, except as noted, is 30 micro-inch gold.
* Consult factory for any tail size or plating requirements.
** Special crimp locator required. Part number: 995-0001-714. (L3198-CL-PSL)
*** Use special insertion tip (323-9510-016 &-017).
Socket
2D and Centi-Loc Crimp and Assembly Tools
M22520/2-01
CIET-CTA
Handle
Insertion Tips
Description
Part Number
Tool
M22520/2-01
995-0001-584
Pin
L3198-CLP
995-0001-338
Locators
Socket
L3198-CLS
995-0001-353
Insertion Tools For Standard Contact
AWG
Size*
Kit Part Number
(handle and tip)
Tip
Part Number**
Handle
Part Number**
22
CIT-PS-CTA-22
323-9510-001
204-9500-000
24
CIT-PS-CTA-24
323-9510-002
204-9500-000
26
CIT-PS-CTA-26
323-9510-003
204-9500-000
28
CIT-PS-CTA-28
323-9510-004
204-9500-000
30/P.C. Tail
CIT-PS-CTA-30
323-9510-005
204-9500-000
* Based on wire size per MIL-W-16878 with Type E insulation, use smaller tool for wire with thin insulation, larger tool for wire having
thick insulation.
** The 5 insertion tips (part numbers 323-9510-001 thru - 005). plus handle, and the pin and sockect extaction tips maybe ordered as a
SINGLE KIT by specifying the part number CIET-CTA-2. [Part number: 070143-0002].
CTA-AB
Assembly Holding
Block
Part Number: 328-9508-000
Socket Extraction
Tip
Pin Extraction
Tip
Insertion Tools For Long Crimp barrel Contacts
AWG
Size*
Tip Part Number ***
Pin Contact
Tip Part Number ***
Socket Contact
Handle
Part Number***
22
323-9510-008
323-9510-012
204-9500-000
24
323-9510-009
323-9510-013
204-9500-000
26
323-9510-010
323-9510-014
204-9500-000
*** To order the SINGLE KIT for the long crimp barrel contact (tip part numbers 323-9510-008 thru -014, handle and pin and socket
extraction tips) please specify CIET-CTA-3.
Extraction Tools
Contact
CENTIPIN
CENTISOCKET
Description
CET-P-CTA-2
CET-S-CTA-1
Kit Part Number
(handle and tip)
070112-0002
070113-0001
Tip Part
Number
324-9502-000
324-9501-000
Handle Part
Number
204-9500-000
204-9500-000
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
288