D20419-80 Datasheet, PDF (238/386 Pages) ITT Industries – Military/Aerospace

Micro-D Metal Shell - .050" Contact Spacing
MDM
Mounting Hardware Views (for size 100)
This hardware supplied unassembled.
90˚Angle Mounting
Bracket
#4-40 UNC-2A
#4 LOCK WASHER
PANEL -
MAY BE USED WITH
.093 (2.36) MAX
THICK PANEL
MATING SIDE
.500 (12.70)
MAX.
.184 (4.70)
MAX.
#4-40 UNC-2B INNER THD
Jackpost - (P)
.123 +_ .005
(3.12 +_ 0.13) DIA.
$4-40 UNC-2B
THD
A
.395 (10.03)
MAX.
180 +.010
-.005
(4.57 ) +.025
-0.13
.064 +_ .010
B
.235 +_ .005
(1.62 +_ 0.25) TYP.
(5.97 +_ 0.13)
This hardware is factory installed.
Description
Jackpost kit
Mounting Bracket 90˚ MDM
Part Number
320-9505-015
015-9528-000
90˚ Angle Mounting
Bracket
A
+_ .005 (0.13)
N/A
B
Max.
.191 (4.85)
.370 (9.40)
.014 +_ .004
(0.36 +_ 0.10) ALLOWABLE
DIAMETRAL FLOAT
.020 (0.51) MAX. ALLOWABLE
AXIAL FLOAT
.174 +_ .005
(4.4 +_ .10)
MATING
FACE
CONNECTOR
SHOWN FOR
REF. ONLY
.735 (18.64)
MAX.
.185 (4.70)
MAX
.093
(2.36)
REF.
.116 +_ .002
(2.29 +_ .051)
DIA
Float Mount - (F) Std.
.031 +_ .003
(0.79 +_ 0.08)
MATING
FACE
#4-40
PART HAS A .040 (1.02)
UNC-2A MAX AXIAL FLOAT
Jackscrew - (K) Standard
*NOTE: Torque vales are as follows:
Low Profile Jackscrew (L)-4.0 in/lbs
Standard Jackscrew (K)-4.0 in/lbs
Jackpost Bushing (for Rear Panel Mounting)
HEX. SOCKET HD.
.078 (1.98) ACROSS FLATS
.050 (1.27 MIN. DEPTH
.155 (3.94) MAX.
.040 (1.02) MAX.
AXIAL FLOAT
MATING SIDE
#4-40 UNC-2A
Jackscrew - (L) (Low Profile)
Panel
Thickness
3/32 (2.4)
1/16 (1.6)
1/32 (0.8)
3/64 (1.2)
A
+.005 (0.13)
-.000 (0.00)
.087 (2.21)
.058 (1.42)
.025 (0.64)
.042 (1.07)
Jackpost Kit
Number*
320-9505-013
320-9505-012
320-9505-010
320-9505-011
*2 jackposts, 2 nuts, 2 washers
ENGAGING FACE
3/16" HEX.
LOCKING POST
#4-40 UNC-2B
3/16" HEX.
LOCKING POST
Dimensions for Rear Panel Mounting
1.800 +_ .005
(45.72 +_ 0.13)
RECEPTACLE SHOWN
FOR REF. ONLY
#4-40 THREAD
RETAINING NUT
.185 (4.70)
.170 (4.32)
A
.500 (12.70)
MAX.
.125
(3.18
+.005
R ^-.000
) ^+0.13
-0.00
1.516
(38.51
+.004
-.000
) ^+1.10
-0.00
.401
(10.18
+.004
-.000
) ^+1.10
-0.00
.161 (4.09)
DIA.
.159 (4.04)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
238