D20419-80 Datasheet, PDF (83/386 Pages) ITT Industries – Military/Aerospace

MIL-C-83733
Pluge/Configurations (Socket Contacts)
DPK/MIL-C-83733 TYPES
Mounting Style Y - MIL-C-83733/7(USAF)
With Guide Sockets and Spring Mounting
DPK
Mounting Style H - MIL-C-83733/12(USAF)
Staggered Spring Mounting
ACROSS HEX FLATS
.138 (3.50)-32 UNC-2B THREAD
16
14
.116 ± .080
(2.94 ± 2.03)
.405 ± .010
(10.28 ± 0.25)
.207 ± .002 DIA.
(5.26 ± .005)
.485 MAX
(12.32)
1.250 (31.75) MAX.
SPRING IN FREE
POSITION
N
.138 (3.50)-32 UNC-2B THREAD
*See page 82
.116 ± .080
(2.94 ± 2.03)
1.250 (31.75) MAX.
SPRING IN FREE
POSITION
.312 (7.92) - 24 UNF-2A
THREAD
NOTES: 1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 59 pounds minimum at .500 (12.70) panel spacing and 88
pounds maximum at .390 (9.91) panel spacing
NOTES: 1. Springs are pre-loaded to 25 pounds each in free position.
2. Spring forces will be 59 pounds minimum at .500 (12.70) panel spacing and 88
pounds maximum at .390 (9.91) panel spacing
3. This configuration must not be used on teh 131 or 185 contact layouts.
DPK Commercial Types
Mounting Style G
Standard Hole Mounting
Mounting Style F
Clinch Nut Mounting
Mounting Syle M
Mounting
.281 ± .005 DIA.
(7.14 ± 0.12)
4 HOLES
N*
See page 82
.281 ± .005 DIA.
(7.14 ± 0.12)
4 HOLES
.141 (3.58)
MAX.
.138 (3.50)-32 UNC-2B THREAD
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
83