ISL78229 Datasheet, PDF (16/71 Pages) Intersil Corporation – 2-Phase Boost Controller with Drivers

ISL78229
Performance Curves Unless otherwise specified, operating conditions for the oscilloscope waveforms are V_IN = 12V,
V_OUT = 36V and T_A = +25°C.
1 00
95
90
85
80
75
70
65
60
55
50
0.01
DE WITH PHASE DROP
DE WITHOUT PHASE DROP
CCM
0.10
1.00
10.00
100 .00
LOAD CURRENT (A)
NOTE: (See Typical Application in Figure 4 on page 8.)
FIGURE 5. EFFICIENCY vs LOAD, 2-PHASE BOOST, 3 MODES
OPERATION, f_SW = 200kHz, V_IN = 12V, V_OUT = 36V,
T_A = +25°C
V_OUT 1.0V/DIV WITH 36V OFFSET
I_L1 5.0A/DIV
PH1 30.0V/DIV
SS 3.0V/DIV
10ms/DIV
FIGURE 6. EN INTO PREBIASED OUTPUT, CCM MODE
(DE/PHDRP = GND), I_OUT = 0A
PVCC 2.0V/DIV
PLLCOMP 500mV/DIV
SS 700mV/DIV
PH1 30.0V/DIV
500µs/DIV
FIGURE 7. EN ON AND INITIALIZATION TO START-UP, I_OUT = 0A
V_OUT 20.0V/DIV
PGOOD 5.0V/DIV
PH1 30.0V/DIV
SS 3.0V/DIV
20ms/DIV
FIGURE 8. SOFT-START, CCM MODE (DE/PHDRP = GND), I_OUT = 8A
SS 2.0V/DIV
PLLCOMP 500mV/DIV
CLKOUT 5.0V/DIV
PVCC 2.0V/DIV
200µs/DIV
FIGURE 9. EN ON AND INITIALIZATION TO START-UP, I_OUT = 0A
Submit Document Feedback ₁₆
V_OUT 20.0V/DIV
PGOOD 5.0V/DIV
PH1 30.0V/DIV
SS 3.0V/DIV
5ms/DIV
FIGURE 10. SOFT-START, DE+PHDROP MODE (DE/PHDRP = FLOAT),
I_OUT = 8A
FN8656.3
February 12, 2016