MC9S08LC60 Datasheet, PDF (75/358 Pages) Freescale Semiconductor, Inc – Microcontrollers

Chapter 5 Resets, Interrupts, and System Configuration
5.8.6 System Device Identification Register (SDIDH, SDIDL)
This read-only register is included so host development systems can identify the HCS08 derivative and
revision number. This allows the development software to recognize where specific memory blocks,
registers, and control bits are located in a target MCU.
7
6
5
4
3
2
1
0
R REV3
REV2
REV1
REV0
ID11
ID10
ID9
ID8
W
Reset
0¹
0⁽¹⁾
0⁽¹⁾
0⁽¹⁾
0
0
0
0
= Unimplemented or Reserved
1 _{The revision number that is hard coded into these bits reflects the current silicon revision level.}
Figure 5-7. System Device Identification Register High (SDIDH)
Table 5-8. SDIDH Field Descriptions
Field
Description
7:4
REV[3:0]
3:0
ID[11:8]
Revision Number — The high-order 4 bits of SDIDH are hard-coded to reflect the current mask set revision
number (0–F).
Part Identification Number — Each derivative in the HCS08 Family has a unique identification number. The
MC9S08LC60 Series is hard-coded to the value 0x0. See also ID bits in Table 5-9.
R
W
Reset
Field
7:0
ID[7:0]
7
6
5
4
3
2
1
0
ID7
ID6
ID5
ID4
ID3
ID2
ID1
ID0
0
0
0
0
1
1
0
0
= Unimplemented or Reserved
Figure 5-8. System Device Identification Register Low (SDIDL)
Table 5-9. SDIDL Field Descriptions
Description
Part Identification Number — Each derivative in the HCS08 Family has a unique identification number. The
MC9S08LC60 Series is hard coded to the value 0x0C. See also ID bits in Table 5-8.
MC9S08LC60 Series Advance Information Data Sheet, Rev. 2
Freescale Semiconductor
PRELIMINARY
75