MC9S08LC60 Datasheet, PDF (336/358 Pages) Freescale Semiconductor, Inc – Microcontrollers

Appendix A Electrical Characteristics
Table A-7. 3 Volt 12-bit ADC Characteristics (V_REFH = V_DDAD, V_REFL = V_SSAD) (continued)
Characteristic
Conditions
C Symbol Min
Typ⁽¹⁾
Max
Unit
Comment
Input Leakage
Error
12 bit mode
10 bit mode
D
E_IL
—
±2
—
LSB² Pad leakage⁽⁴⁾
—
±0.2
±4
* R_AS
8 bit mode
—
±0.1
±1.2
Temp Sensor
Slope
-40°C– 25°C
25°C– 125°C
D
m
—
1.646
— mV/°C
—
1.769
—
Temp Sensor
Voltage
25°C
D V_TEMP25
—
701.2
—
mV
1 _{Typical values assume VDDAD = 3.0V, Temp = 25°C, fADCK=1.0MHz unless otherwise stated. Typical values are for reference}
only and are not tested in production.
2 _{1 LSB = (VREFH - VREFL)/2}N
3 _{Monotonicity and No-Missing-Codes guaranteed in 10 bit and 8 bit modes}
4 _{Based on input pad leakage current. Refer to pad electricals.}
A.8 LCD Characteristics
Table 7. LCD Electricals, 3-V Glass
Characteristic
Symbol Min Typ Max Unit
LCD Supply Voltage
V_LCD
0.9
-
1.8
V
LCD Frame Frequency
f_Rame
25 30
100 Hz
LCD Charge Pump Capacitance
C_LCD
100 100 433 nF
LCD Bypass Capacitance
C_BYLCD
100 100
433
nF
LCD Current Consumption
V_LL2 connect to V_DD; V_DD = 2 V
all segments off, all FP enabled
I_segoff
— 0.35
—
µA
half of segments on
I_seghalf
—
1
—
µA
all segments on I_segallon
—
1
—
µA
LCD Current Consumption
Trippler Buffered Mode; V_DD = 3 V, V_LCD = 1.0 V
all segments off, all FP enabled
I_segoff
— 2.65
—
µA
half of segments on
I_seghalf
— 3.8
—
µA
all segments on I_segallon
— 3.6
—
µA
Note: Current consumption data based on using the external 32-kHz oscillator with LCD configured using
the low-power wave forms option, a 1/4 duty, and a 32-Hz frame frequency. C_LCD = C_BYLCD = 100
nF; 160 segment 2000 pF LCD panel.
MC9S08LC60 Series Advance Information Data Sheet, Rev. 2
336
PRELIMINARY
Freescale Semiconductor