MC68HC908QL4 Datasheet, PDF (5/226 Pages) Motorola, Inc – Microcontrollers

Revision History (Sheet 2 of 2)
Date
December,
2004
August,
2005
September,
2005
October,
2006
Revision
Level
4.0
5.0
6.0
7.0
Description
Updated to final Freescale format. Corrections per email review.
Replaced ADC chapter with latest.
Table 1-3. Function Priority in Shared Pins — Updated entry for PTA2
Figure 1-2. MCU Pin Assignments — Corrected pin assignments for the
TSSOP packages.
17.11 Oscillator Characteristics — Updated deviation from trimmed
internal oscillator specifications.
17.8 3.3-V DC Electrical Characteristics — Corrected capacitance values
17.11 Oscillator Characteristics — Corrected Note 8
13.4.1 External Pin Reset — Corrected location of RSTEN bit from
CONFIG1 to CONFIG2.
13.4.2 Active Resets from Internal Sources — Corrected location of
RSTEN bit from CONFIG1 to CONFIG2.
Chapter 18 Ordering Information and Mechanical Specifications —
Replaced case outlines with appropriate 98A drawing.
Figure 2-1. Memory Map — Corrected address labels.
Removed all references to the MC68HC908QL3 and MC68HC908QL2.
1.6 Unused Pin Termination — Added new section.
Chapter 4 Auto Wakeup Module (AWU) — Updated entire section for
clarity.
12.2 Unused Pin Termination — Added new section.
The following sections were updated to show that a break interrupt
inhibits input captures:
15.6 TIM During Break Interrupts
16.2.1.2 TIM During Break Interrupts
Updated DC injection current specification in the following subsections:
17.5 5-V DC Electrical Characteristics
17.8 3.3-V DC Electrical Characteristics
Page
Number(s)
Throughout
23
21
210
208
211
120
120
219
26
Throughout
24
57
111
179
189
204
207
MC68HC908QL4 Data Sheet, Rev. 7
Freescale Semiconductor
5