10-503140-032 Datasheet, PDF (84/437 Pages) Amphenol Corporation – The Interconnection Leader

SJT
How to Order, Alternate Rotations
Amphenol
Aerospace
Easy Steps to build a part number... SJT
1.
2.
3.
4.
5.
Connector Type
SJT
SJT
Shell Style
00
Service Class
RT
Shell Size-
Insert Arrangement.
18-66
Contact Type
P
6.
Alternate Keying
Position
A
7.
Finish
Variations Suffix
(XXX)
Step 1. Select a Connector Type
Designates
SJT
SJTS
SJTG
SJTP
Standard scoop-proof Junior Tri-Lock Connector
High Temperature Connector
Plug with Grounding Fingers
Back Panel Mounted
Step 2. Select a Shell Style
Designates
00 ^{Wall Mount Receptacle}
06 ^{Straight Plug}
07 ^{Jam Nut Receptacle}
I
Solder Mount Receptacle – Hermetic
Step 6. Select an Alternate Keying Position
A plug with a given rotation letter will mate with a receptacle with
the same rotation letter. The AB angle for a given connector is the
same whether it contains pins or sockets. Inserts are not rotated
in conjunction with the master key/keyway.
AB angles shown are viewed from the front face of the connector.
A recept­acle is shown below. The angles for the plug are exactly
the same, except the direction of rotation is opposite of that
shown for the receptacle.
Key/Keyway Rotation
AB ANGLE OF ROTATION (Degrees)
Shell Size Normal
A
 8
95
10
95
81
12
95
75
14
95
74
16
95
77
18
95
77
20
95
77
22
95
80
24
95
80
B
C
D
67
123
109
63
127
115
61
129
116
65
125
113
65
125
113
65
125
113
69
121
110
69
121
110
Step 3. Select a Service Class
Designates
For hermetic applications. . . Fused compression glass
Y
sealed inserts. Leakage rate less than 1.0 x 10^-6 cc/sec.
at 15 psi differential; with interfacial seal.
For environmental applications – supplied without
RT
rear accesso­ries. Design provides serrations on rear
threads of shells with mois­ture sealing pilot for back
shells.
For additional information defining complete description of service
class, consult Amphenol, Sidney, NY.
RELATIVE POSSIBLE
POSITION OF
ROTATED MASTER
KEYWAY
(front face of
receptacle shown)
Step 4. Select a Shell Size & Insert
Arrangement from chart on pg. 84.
To view Insert Arrangement illustrations
see pgs. 8-12.
Shell Size & Insert Arrangements are together in one
chart. First number represents Shell Size, second
number is the Insert Arrangement. Only selected
illustrations are available for SJT on pages 8-12. Please
refer to chart on page 84 for select Insert Arrangements.
Step 7. Select a Finish Variation Suffix
FINISH DATA
Aluminum Shell Components Non-Hermetic
Finish
Indicated Finish
Suffix Standard for SJT Types
Bright Cadmium Plated Nickel Base
SJT/SJTG
Anodic Coating (Alumilite)
Chromate Treated (Iridite 14-2)
Olive Drab Cadmium Plate Nickel Base
(005)
(011)
(014)
Step 5. Select a Contact Type
Designates
P ^{Pin Contacts}
S ^{Socket Contacts}
Electroless Nickel Coating
(023)
Hermetic Connectors
Carbon Steel Shell, Tin Plated Shell
and Contacts
Stainless Steel Shell, Gold Plated
Contacts
Consult
Amphenol
SJT(  )Y
Contact Amphenol Aerospace for more information at 800-678-0141•www.amphenol-aerospace.com 83