10-503140-032 Datasheet, PDF (369/437 Pages) Amphenol Corporation – The Interconnection Leader

Amp_Ah_ee_ron_spo_acl_e
Quadrax Contacts, Quadrax
Terminators, Transition Adapters
QUADRAX CONTACTS
FOR ARINC
CONNECTORS
Amphenol ARINC 600 Rack and Panel
connectors can incorporate high speed
quadrax contacts as well as coax,
twinax and differential twinax contacts.
R27 Rack and Panel connectors use the
same contacts as ARINC 600 connec-
tors. For more information about rack
and panel connectors contact Amphenol
Aerospace, Sidney, NY.
BOARD LEVEL
CONNECTORS WITH
COMPLIANT QUADRAX
CONTACTS
Amphenol also provides compliant
quadrax socket contacts and Quadrax
pin contacts with PC tails for attaching to
printed circuit boards. See page 382 for
more information.
Quadrax Contact for
ARINC Connectors
Compliant Quadrax Socket and
PCB Tail Quadrax Pin
Board Level Connector
with Compliant
Quadrax Contacts
FEED-THROUGH CON-
NECTOR WITH QUADRAX
CONTACTS
Amphenol’s feed-through connector is
double-ended for through bulkhead
applications. Consult Amphenol for
more information.
Straight Quadrax
Receptacle Contact
Quadrax Terminators
Amphenol offers a terminator assembly which
is a low reactance, resistive impedance match
to the characteristic impedance of a
transmission line. It is used to terminate the far
ends of a transmission line or an open tap so
that the energy from signals traveling down the
transmission line is absorbed within the resistor
and not reflected back down the transmission
line causing signal interference (noise).
Consult Amphenol for more information.
Quadrax Terminator
90° Quadrax Receptacle
and Plug Transition
Adapter
Transition Adapters
In conjunction with its Differential Twinax and Quadrax contacts, Amphenol
has developed a full line of Transition Adapters in order to facilitate launching of
controlled impedance signals to printed circuit boards. These use differential
twinax or quadrax 90° or straight receptacles and they can be either threaded or
cable to board direct. The threaded transition adapters provide an ideal method
of disconnecting the differential twinax or quadrax connector from the board.
90° Differential Twinax
Receptacle and Plug
Transition Adapter
See pages 383-385 for further description, performance data and ordering of
transition adapters.
3
368 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com