10-503140-032 Datasheet, PDF (131/437 Pages) Amphenol Corporation – The Interconnection Leader

Amp_Ah_ee_ron_spo_acl_e
MIL-DTL-83723, Series III, Matrix^®
How to Order – Threaded Coupling Connectors
MIL-DTL-83723,
Series III
MILITARY
1.
Connector
Type
M83723
2.
Connector Style
(Threaded) and
Contact Type)
/84
3.
Service
Class
R
4.
Shell Size/
Insert
Arrangement
803
5.
Alternate Keying Position
of Shell or
Alternate Rotation of Insert
N
Amphenol^®/Matrix^®
MIL-DTL-83723,
Series III
COMMERCIAL
1.
Connector
Type
(Threaded)
MT
2.
Connector
Style
34
3.
Service
Class
R
4.
Shell Size/
Insert
Arrangement
0803
5.
Contact
Type
P
6.
7.
Alternate Keying Position
of Shell or
Modification
Alternate Rotation of Insert Number
7
XXX
Step 1. Military Connector Type
M83723 Designates MIL-DTL-83723
Series III Connectors
Step 2. Select a Connector Style
(Refer to military specification slash sheet number).
Designates
/82 Wall Mount Receptacle with Socket Contacts
/83 Wall Mount Receptacle with Pin Contacts
/84 Jam Nut Receptacle with Socket Contacts
/85 Jam Nut Receptacle with Pin Contacts
/86 Standard Straight Plug with Socket Contacts
/87 Standard Straight Plug with Pin Contacts
/91 Straight Plug with RFI grounding, Socket Contacts
/92 Straight Plug with RFI grounding, Pin Contacts
/95 Straight Plug with Self-Locking Clutch Plate, Socket Contacts
/96 Straight Plug with Self-Locking Clutch Plate, Pin Contacts
Step 3. Select a Service Class
Designates
A
Aluminum shell, black non-conductive anodize finish, fluid resis-
tant insert
R Aluminum shell, electroless nickel finish, fluid resistant insert
G Stainless steel shell, passivated, fluid resistant insert
W Aluminum shell, olive drab cadmium plated, fluid resistant insert
See additional classes of MIL-DTL-83723, Series III which are available in the
Amphenol/Pyle versions: Classes K, S, N - firewall, high temperature (200°C
– 260°C) and Classes H and Y - hermetics. These are covered in the 83723
Pyle section of this catalog.
Step 4. Select a Shell Size & Insert
Arrangement from chart on pg. 124.
Shell Size & Insert Arrangements are on page 124. First
number represents Shell Size, second number is the Insert
Arrangement. (Note that shell size 28 is not an MS connector,
and should be ordered by commercial number.)
Step 5. Select an Alternate Keying Position -
Rotation of master key/keyway of shell.
Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying
positions. See page 124 for descriptions.
or Step 5. Select an Alternate Rotation of Insert.
Use N for Normal. Use 1, 2, 3, 4, or 5 for alternate rotation of
insert. See page 124 for descriptions.
For ordering information on accessories, such as protection caps and
backshell hardware, contact Amphenol Aerospace, Sidney, NY.
Step 1. Commercial Connector Type
MT Designates Amphenol^®/Matrix^®
Threaded Coupling Connector
Step 2. Select a Connector Style
Designates
30 Wall Mount Receptacle
34 Jam Mount Receptacle
36 Standard Straight Plug
38 Straight Plug with RFI grounding fingers
37 Straight Plug with Self-Locking Clutch Plate
Step 3. Select a Service Class
Designates
A
Aluminum shell, black non-conductive anodize finish,
fluid resistant insert
R
Aluminum shell, electroless nickel finish, fluid resistant
insert
G Stainless steel shell, passivated, fluid resistant insert
W
Aluminum shell, cadmium olive drab finish,
corrosion resistant, fluid resistant insert
See additional classes of MIL-DTL-83723, Series III which are
available in the Amphenol/Pyle versions: Classes K, S, N - firewall,
high temperature (200°C – 260°C) and Classes H and Y - hermetics.
These are covered in the 83723 Pyle section of this catalog.
Step 4. Select a Shell Size & Insert
Arrangement from chart on pg. 124.
Shell Size & Insert Arrangements are on page 124. First
number represents Shell Size, second number is the
Insert Arrangement.
Step 5. Select a Contact Type
Designates
P ^{Pin Contacts}
S ^{Socket Contacts}
Step 6. Select an Alternate Keying Position -
Rotation of master key/keyway of shell.
Use 6, 7, 8, 9 or Y for alternate keying positions. No letter
required for normal (No rotation position). See page 124
for descriptions.
or Step 6. Select an Alternate Rotation of Insert.
Use 1, 2, 3, 4, or 5 for alternate rotation of insert.
No letter required for normal (No rotation position)
See page 124 for descriptions.
Step 7. Modification Number
Consult Amphenol Aerospace for information.
130 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com