10-503140-032 Datasheet, PDF (394/437 Pages) Amphenol Corporation – The Interconnection Leader

Coaxial Contacts for MIL-DTL-38999
Application Data, cont.
Amphenol
Aerospace
LJT-R, MIL-DTL-38999 Series I; TV-R, MIL-DTL-38999 Series III; Amphe-Lite and
SJT-R Series, SAE AS39029 (28, 59, 60, 75, 76, 77), cont.
Cable
COAX CONTACTS FOR USE IN LJT-R, TV-R, AMPHE-LITE AND SJT-R CONNECTORS, CONT.
Contact Part Number
(Termination Instruction Sheet)***
Pin
Socket
Contact
Size
Crimping Tools
Inner Contact Crimp Ferrule
Installation Tools
Insertion
Removal
Haveg 51-03111, Tensolite
28895/2X1
21-33102-22
(L-1107-B)
21-33101-22
(L-1107-F)
RG-180B/U, RG-195A/U,
Raychem 9528A1318
21-33102-21
(M39029/60-367
Supersedes
MS27536)
(L-1107-A)
21-33101-21
(M39029/59-366
Supersedes
MS27535)
(L-1107-E)
RD-316 Double Shield
(M17/152-00001)
21-33102-25
(L-1107-J)
21-33101-25
(L-1107-N)
M22520/2-01
with Positioner
M22520/2-31**
or solder
M22520/5-01
with die set
M22520/5-05 (B)
or M22520/5-41
(B)
or M22520/10-01
with Die Set
M22520/10-07 (B)
M22520/2-01
with Positioner
M22520/2-31
M22520/5-01
with Die Set
M22520/5-37 (B)
or
M22520/10-01
with Die Set
M22520/10-15 (A)
Raychem 7524D5111-9
(triax cable - contact will
21-33102-26
21-33101-26
terminate inner coax portion
(L-1107-M)
(L-1107-M)
only)
8
Hand
inserted
11-9170 or MS
RG-400, ECS3C058A
ECS352001
21-33102-27
(L-1286-B)
21-33101-27
(L-1293-B)
M22520/2-01
with Positioner
M22520/2-10
M22520/5-01
with Die Set
M22520/5-45 (A)
RG-58 (M17/155-00001),
M17/028-RG-058
21-33102-29
(L-1107-AA)
21-33101-29
(L-1107-Y)†
Solder
M22520/5-01
with Die Set
M22520/5-05 (B)
5021D1331-0
5M2869-001
ESC432101
5022A1311-0
21-33102-36
(L-1107-P)
21-33102-37
(L-1107-V)
21-33102-39
(L-1107-AC)
21-33101-36†
(L-1107-Q)
21-33101-37
(L-1107-W)
21-33101-36†
(L-1107-AB)
M22520/2-01
with Positioner
M22520/2-31
M22520/5-01
with Die Set
M22520/5-05 (B)
or
M22520/10-01
with Die Set
M22520/10-07 (B)
FA-19X
T Flex-402
21-33652-1
(L-2091-A)
21-33102-41
(L-1107-AG)
21-033653-1
(L-2091-B)
21-33101-41
(L-1107-AF)
M22520/2-01
with Positioner
K1106
Solder
M22520/5-01
with Die Set Y25
(B)
M22520/5-01
with Die Set
M22520/5-05 (B)
NOTE: SAE AS39029 supersedes MIL-C-39029
NOTE: Contacts can be ordered by part numbers given in chart
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part
num­bers indicate applicable die closure. Commercial equivalents with the same
die clos­ ure dimension may be used.
CONTACT ORDERING: Example number given in chart 21-33102-22 should be
ordered as 21-033102-022; example number 21-33652-1 should be ordered as
21-033652-001. Adding Zeros is necessary for Amphenol ordering process on
all contact numbers.
† Consult Amphenol Aerospace for current release of this contact or instruction
sheet if applicable
**When inner contact is installed by crimping only. 11-10134 Expander Tool
Kit must be used to assemble rear insulator over contact.
***Termination instructions are packaged with each contact and can be found
on-line at: www.amphenol-aerospace.com/serviceinstructions.asp
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 393