10-503140-032 Datasheet, PDF (380/437 Pages) Amphenol Corporation – The Interconnection Leader

Quadrax Contacts, MIL-DTL-38999, Series III _Amphenol
Application Data
Aerospace
TV-R Series, MIL-DTL-38999 Series III* Connectors
QUADRAX CONTACTS FOR USE IN TV-R CONNECTORS
Cable
Tensolite 26473/02006X-4(LD) Same as
21-33384/5-31 but box pattern (not for new
designs, use 21-33450/1 series)
Tensolite 26473/02006X-4(LD), Gore RCN8328
Tensolite 26473/02006X-4(LD), Gore RCN8328
(same as 21-33450/1-1 except box pattern.
Mates with 21-33450/1-11 only.
Contact Part Number
(Termination Instruction Sheet)**
Pin
Socket
Impedance
(Ohms)
Inner
Conductor
(AWG)
Contact
Size
Electrical
Protocol††
Crimping Tools
Inner
Outer
Contact Contact
21-33384-201† 21-33385-201†
21-33450-001 21-33451-001
(L-2119-BW) (L-2119-BW)
150
21-33450-011† 21-33451-011†
26
26
8
Fibre-Channel (1 GBPS, 2
GBPS, 1G/2G), 1000 Base-CX
(1.25 GBPS), SCSI-2 (3.2 GBPS)
Fibre-Channel (1 GBPS, 2
M22520/2-01
with Positioner
M22520/2-37
or with Daniels
Positioner K709
M22520/5-01
with Die Set
M22520/5-45
(Location A)
26
GBPS, 1G/2G), 1000 Base-CX
(1.25 GBPS), SCSI-2 (3.2 GBPS)
PCB QUADRAX CONTACTS FOR USE IN TV-R CONNECTORS
PCB Quadrax
Contacts
PCB (1.035 Length) Pre-tinned tails
PCB (.866 Length)
PCB Right Angle, inner contacts box pattern
PCB (.494 Length) Pre-tinned tails
PCB (1.194 Length) Pre-tinned tails
PCB (.859 Length)
PCB (.741 Length)
PCB (1.035 Length)
PCB (.836 Length)
PCB (1.035 Length) Pre-tinned tails
PCB (1.035 Length) mates to 21-33451 series
PCB (1.035 Length) mates to 21-33450 series
PCB (.815 Length) mates to 21-33451 series
PCB (.815 Length) mates to 21-33450 series
PCB (.815 Length) Pre-tinned tails, mates to 21-33451
series
PCB (.815 Length) Pre-tinned tails, mates to 21-33450
series
PCB .866 Length) mates to 21-33451 series
PCB (.866 Length) mates to 21-33450 series
PCB (.494 Length) mates to 21-33451 series
PCB (.494 Length) mates to 21-33450 series
PCB (.840 Length) Pre-tinned tails
PCB (.780 Length) Pre-tinned tails
PCB (.840 Length) Pre-tinned tails
PCB (.708 Length)
PCB (.605 Length)
PCB (.494 Length)
PCB (.741 Length)
PCB (.806 Length)
PCB (.940 Length)
PCB (.939 Length)
PCB (.672 Length)
PCB (.914 Length)
PCB (.866 Length)
PCB (.901 Length)
PCB (.871 Length)
PCB (1.169 Length)
Contact Part Number
Pin
Socket
21-33398-21 21-33397-21
21-33398-31 21-33397-31
21-33425-1
21-33398-71
21-33398-101
21-33398-121
21-33398-271†
21-33398-291 21-33397-291
21-33397-301
21-33398-61 21-33397-61
21-33452-11†
21-33453-11†
21-33452-21†
21-33453-21†
21-33452-31†
21-33453-31†
21-33452-41†
21-33452-51†
21-33398-81
21-33398-131
21-33398-91
21-33398-111
21-33398-191
21-33398-231
21-33398-241
21-33398-281
21-33398-311
21-33398-361
21-33398-371
21-33398-381
21-33398-411
21-33453-41†
21-33453-51†
21-33397-241
21-33397-341
21-33397-351
21-33397-421
Impedance
(Ohms)
100
100
100
150
100
100
100
100
150
150
150
150
150
150
150
150
150
150
150
150
150
150
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Contact
Size
8
CONTACT ORDERING: Example number given in chart
above 21-33384-201 should be ordered as 21-033384-
201; example number given in chart at left 21-33398-21
should be ordered as 21-033398-021. Adding Zeros is
necessary for Amphenol ordering process on all contact
numbers
Daniels crimping tools are available from Daniels Mfg.
Corp. 6103 Anno Ave., Orlando, FL 32809
* Requires modified connector to accommodate
keyed contacts.
**Termination instructions are packaged with each
contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
† Consult Amphenol Aerospace for current release
of this contact or instruction sheet if applicable.
†† Test reports available for indicated protocols.
Consult Amphenol Aerospace.
SEALING PLUGS
Sealing Plugs
for use with D38999 Connectors
using Quadrax Contacts -
Size 8 Cavities
Standard Plastic
Standard Plastic to be used with
PCB tails (shorter tail length)
Metal sealing plug - can be used
when mating with contacts on
mating half
Metal sealing plug used with PCB’s
and mating contact on mating half
Part Number
T3-4008-59P
T3-4008-59P1
21-33899-8Q1
21-33899-8Q2
PIGGYBACK GROMMET
Grommet for use with D38999
Connectors
using Quadrax Contacts
Metallized piggyback grommet
Part Number
21-33321-23
Indicated length given in chart at left is the distance
from the rear of the contact retention shoulder to the
tip of the PCB tails.
LENGTH
INDICATED IN
TABLE COLUMN
Note: it does not indicate stickout length when
installed in D38999 connector.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 379