10-503140-032 Datasheet, PDF (409/437 Pages) Amphenol Corporation – The Interconnection Leader

Amp_Ah_ee_ron_spo_acl_e
Coaxial Contacts for MIL-DTL-5015,
Heavy Duty MIL-DTL-22992 General Description
Amphenol^® Coaxial Contacts- can be incorporated into MS/Standard
MIL-DTL-5015 Type Circular Connectors and Heavy Duty MIL-DTL-22992 Connec­
tors. They offer the same durability advantages and design benefits for reliable
interconnection as the Amphenol coax contacts used in high performance D38999
connectors. A variety of military and commercial shielded cables are accommodated
within these circular series.
Other features of the coax contacts available for MS/Standard and Heavy Duty
circulars include:
• Several insert arrangements that can incorporate:
• Size 4, 8 and 12 coax contacts
• Advanced shielding wire technology in a rugged military connector
• Single connector with multiple coaxial connection eliminates cross-mating
• Positive contact captivation - especially important in these series with its much
higher coupling/uncoupling force
• Older shielded cable type availability
Coax Contact, Pin
for use in MS/Standard MIL-DTL-5015 and
Heavy Duty MIL-DTL-22992 Connectors
Coax Contact, Socket
for use in MS/Standard MIL-DTL-5015 and
Heavy Duty MIL-DTL-22992 Connectors
TYPICAL ELECTRICAL PERFORMANCE
Size 4, 8 & 12 Contacts
Contact Resistance:
Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°C
Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25°C
Dielectric Withstanding Voltage:
Size 4 & 8: 1,300 VAC Rms @ sea level
Size 12: 1,000 VAC Rms @ sea level
Size 4, 8 & 12: 250 VAC Rms @ 50,000 ft.
Insulation Resistance
5,000 megohms minimum @ 25°C
All contacts in these series are non-impedance matched contacts.
Part numbers 21-33063-XX(  ) and 21-33064-XX(  ) are moisture seal
design (internal O-ring).
CONTACT FINISHES:
Suffix     Finish
1 0.00020 min. silver over copper flash
2 0.00005 min. gold (Knoop hardness 130-200) over silver
3 0.00010 min. gold (Knoop hardness 130-200) over silver
4 0.00010 min. gold (Knoop hardness 130-200) over copper
5 0.00005 min. gold (Knoop hardness 130-200) over nickel
E 0.00005 min. gold (Knoop hardness 90 max.) over copper
F 0.00005 min. gold (Knoop hardness 130-200) over copper
H 0.00010 min. gold (Knoop hardness 130-200) over copper
408 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com