10-503140-032 Datasheet, PDF (290/437 Pages) Amphenol Corporation – The Interconnection Leader

How to Order
Filter Connectors Continues
Step 5. Select a Shell Size
& Insert Arrangement
Shell Size
Designates
8 through 24 Shell sizes available for FJT, Series I
9 through 25
Shell sizes available for FLJT, Series II and
TV, Series III
Shell Size & Insert Arrangements are together in one chart.
First number represents Shell Size, second number is
the Insert Arrangement.
• MIL-DTL-38999 see pages 4-7
• MIL-DTL-26482, Matix Series 2 see page 111
or catalog 12-070 for Series 1
• MIL-DTL-5015, Matrix see pages 172 &173
or catalog 12-020
• High Density HD38999 Filter Connector in Stand-off shells
see page 43 and consult Amphenol Aerospace
for ordering information.
Amphenol
Aerospace
Step 6. Select the type of Contact
and Normal or Alternate Keying Positions
Shell Size Designates
P
Pins in a normal rotation
S
Socket in a normal rotation
For alternate keying positions for each series:
• FTV/CTV see pages 290
• FJT see page 301
• FLJT see page 308
• FSJT see page 318
• FBL see page 322
• FPT see page 324
• FAN see page 330
see page 43 and consult Amphenol Aerospace
for ordering information.
Note:
-2XX Suffix
Any combination of filters, non-filters, grounds, and non-standard
contact terminations will require -2XX suffix. Please consult
Amphenol Aerospace for assistance in setting up these part
numbers.
• Standard voltage for diode is ±8 volts. Any deviation requires a
–2XX suffix.
• Standard voltage for a MOV is 47 volts. Any deviation requires a
–2XX suffix.
• Standard diode/filter combination is ±8 volt/VHF-1 filter.
Any deviation requires a –2XX suffix.
• Standard MOV/filter combination is 47 volt/VHF-1 filter.
Any deviation requires a –2XX suffix.
See page 332 for ordering adapters; page 106, 107 for ordering
universal headers.
New
Featured
NEW High Density Patterns are available in Filter 38999
connectors in standard Mil-Spec or filter length shells. They
provide 30% more contacts than standard insert arrangement
patterns. Please see page 43 and consult Amphenol Aerospace
for ordering Information.
Record your part numbers here...
1.
2.
3.
Filter Connector Connector and
Designator
Filter Type
Shell Finish
4.
Shell Styles
5.
Shell Size –
Insert Arrangements
6.
Type of Contact and
Keyway Position
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 289