10-503140-032 Datasheet, PDF (386/437 Pages) Amphenol Corporation – The Interconnection Leader

Quadrax Transition Adapters
For Attachment to PC Boards
Application Data
Amphenol
Aerospace
Quadrax Type Adapter/
Cable or PCB Tail Length
Quadrax Plug Adapter/
Tensolite 26473/02006X-4(LD),
Gore RCN8328
150 OHM QUADRAX TRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS
Illustration of Adapter
Part Number
(Termination Instruction Sheet)**
Plug
Receptacle
Impedance
(Ohms)
Mating
Thread
Size
Crimping Tools
Inner Contact Outer Contact
21-33836-21
(L-2119-S)
M22520/2-01
with Positioner
M22520/2-34
PCB Quadrax Receptacle 90
Degree Adapter/
Tail Length .110
PCB Quadrax Receptacle
Straight Adapter/
Tail Length .110
21-33837-21
150
.375
NA
NA
21-33837-31
Quadrax Receptacle Straight
Adapter in-line Jam Nut
(threaded) Tensolite
26473/02006X-4 (LD), Gore
RCN8328
Quadrax Receptacle 90
degree Adapter with cable to
board/
Tensolite 26473/02006X-4
Quadrax Receptacle Straight
Adapter
with cable to board/
Tensolite 26473/02006X-4 (LD)
21-33837-211
(L-2119-BY)
21-33837-71 150
(L-2119-AI)†
21-33837-
111
(L-2119-AP)
M22520/2-01
with Positioner
M22520/2-34
M22520/5-01
with Die Set
M22520/5-45
(Location A)
CONTACT ORDERING: Example number given in chart 21-33837-81
should be ordered as 21-033837-081; example number 21-33837-101
should be ordered as 21-033837-101. Adding Zeros is necessary for
Amphenol ordering process on all contact numbers.
Daniels crimping tools are available from Daniels Mfg. Corp. 6103 Anno
Ave., Orlando, FL 32809
**Termination instructions are packaged with each contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
† Consult Amphenol Aerospace for current release of this adapter and
instruction sheet if applicable.
See electrical protocols for transition adapters on page 383.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 385