10-503140-032 Datasheet, PDF (385/437 Pages) Amphenol Corporation – The Interconnection Leader

Amp_Ah_ee_ron_spo_acl_e
Quadrax Transition Adapters
for Attachment to PC Boards
Application Data
Quadrax Type Adapter/
Cable or PCB Tail Length
Quadrax Plug Adapter/
Tensolite NF24Q100
Quadrax Plug Adapter/
Tensolite NF22Q100,
NF22Q100-01, Thermax 956-5
Quadrax Plug Adapter/
Draka Fileca F-4703-3,
F-4704-4
Quadrax Plug Adapter/
NF26Q100
Quadrax Plug Adapter/
Hexnut with Lock Wire Holes
Tensolite NF24Q100
Quadrax Receptacle Straight
Adapter in-line jam nut
(threaded)/ GSC-10-8273900
Quadrax Receptacle Straight
Adapter in-line (threaded)/
NF24Q100
PCB Quadrax Receptacle 90
Degree Adapter/
Tail Length .110
PCB Quadrax Receptacle 90
Degree Adapter/
Tail Length .200
PCB Quadrax Receptacle
Straight Adapter/
Tail Length .110
PCB Quadrax Receptacle
Straight Adapter/
Special Tail Length (.200)
Quadrax Receptacle 90
degree Adapter with cable to
board/
NF24Q100
Quadrax Receptacle 90
degree Adapter with cable to
board/
ABS1503KD24
Quadrax Receptacle Straight
Adapter
with cable to board/
NF24Q100
100 OHM QUADRAX TRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS
Illustration of Adapter
Part Number
(Termination Instruction Sheet)**
Plug
Receptacle
21-33836-31
(L-2119-U)
Impedance
(Ohms)
Mating
Thread
Size
Crimping Tools
Inner Contact Outer Contact
21-33836-41
(L-2119-W)†
21-33836-51
(L-2119-Y)
21-33836-61
(L-2119-AM)†
21-33836-81
21-33837-81
(L-2119-AR)†
100
21-33837-91
(L-2119-BL)
M22520/2-01
with Positioner
M22520/2-37
or with
Daniels
Positioner
K709
M22520/5-01
with Die Set
M22520/5-45
(Location A)
.375
21-33837-41
21-33837-201
21-33837-51
NA
NA
21-33837-61
21-33837-141
(L-2119-BB)†
21-33837-231 100
21-33837-101
(L-2119-AN)
M22520/2-01
with Positioner
M22520/2-37
or with
Daniels
Positioner
K709
M22520/5-01
with Die Set
M22520/5-45
(Location A)
CONTACT ORDERING: Example number given in chart 21-33837-81
should be ordered as 21-033837-081; example number 21-33837-101
should be ordered as 21-033837-101. Adding Zeros is necessary for
Amphenol ordering process on all contact numbers.
Daniels crimping tools are available from Daniels Mfg. Corp. 6103 Anno
Ave., Orlando, FL 32809
**Termination instructions are packaged with each contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
† Consult Amphenol Aerospace for current release of this adapter and
instruction sheet if applicable.
See electrical protocols for transition adapters on page 383.
384 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com