10-503140-032 Datasheet, PDF (128/437 Pages) Amphenol Corporation – The Interconnection Leader

MIL-DTL-83723, Series III, Matrix^®
How to Order – Bayonet Coupling Connectors
Amphenol
Aerospace
MIL-DTL-83723,
Series III
MILITARY
1.
Connector
Type
M83723
2.
Connector Style
(Bayonet) and
Contact Type
/74
3.
Service
Class
R
4.
Shell Size/
Insert
Arrangement
1203
5.
Alternate Keying Position
of Shell or
Alternate Rotation of Insert
7
Amphenol^® Matrix^®
MIL-DTL-83723,
Series III
COMMERCIAL
1.
Connector
Type
(Bayonet)
MB
2.
Connector
Style
34
3.
Service
Class
R
4.
Shell Size/
Insert
Arrangement
1203
5.
Contact
Type
P
6.
7.
Alternate Keying Position
of Shell or
Modification
Alternate Rotation of Insert Number
7
XXX
Step 1. Military Connector Type
M83723 Designates MIL-DTL-83723
Series III Connectors
Step 2. Select a Connector Style
(Refer to military specification slash sheet number.) Bayonet coupling
connectors are designated by numbers /71 -/78 as follows:
Designates
/71 Wall Mount Receptacle with Socket Contacts
/72 Wall Mount Receptacle with Pin Contacts
/73 Jam Nut Receptacle with Socket Contacts
Step 1. Commercial Connector Type
MB Designates Amphenol^®/Matrix^®
Bayonet Coupling Connectors
Step 2. Select a Connector Style
Designates
30 Wall Mount Receptacle
34 Jam Mount Receptacle
36 Standard Straight Plug
38 Straight Plug with RFI grounding fingers
Step 3. Select a Service Class
/74 Jam Nut Receptacle with Pin Contacts
/75 Standard Straight Plug with Socket Contacts
/76 Standard Straight Plug with Pin Contacts
/77 Straight Plug with RFI grounding, Socket Contacts
/78 Straight Plug with RFI grounding, Pin Contacts
Step 3. Select a Service Class
Designates
A
Aluminum shell, black non-conductive anodize finish, fluid
resistant insert
R
Aluminum shell, electroless nickel finish, fluid resistant insert
G ^{Stainless steel shell, passivated, fluid resistant insert}
W
Aluminum shell, olive drab cadmium plated, fluid resistant
insert
Note: Consult Amphenol Aerospace for hermetic classes
H and Y availability.
Step 4. Select a Shell Size & Insert
Arrangement from chart on pg. 124.
Shell Size & Insert Arrangements are on page 124. First
number represents Shell Size, second number is the
Insert Arrangement.
Step 5. Select an Alternate Keying Position -
Rotation of master key/keyway of shell.
Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying
positions. See page 124 for descriptions.
Designates
A
Aluminum shell, black non-conductive anodize
finish, fluid resistant insert
R
Aluminum shell, electroless nickel finish, fluid
resistant insert
G
Stainless steel shell, passivated, fluid resistant
insert
W
Aluminum shell, cadmium olive drab finish,
corrosion resistant, fluid resistant insert
Note: Consult Amphenol Aerospace for hermetic classes
H and Y availability.
Step 4. Select a Shell Size & Insert
Arrangement from chart on page 124.
Shell Size & Insert Arrangements are on page 124. First
number represents Shell Size, second number is the Insert
Arrangement.
Step 5. Select a Contact Type
Designates
P ^{Pin Contacts}
S ^{Socket Contacts}
Step 6. Select an Alternate Keying Position -
Rotation of master key/keyway of shell.
Use 6, 7, 8, 9 or Y for alternate keying positions. No letter
required for normal (No rotation position). See page 124 for
descriptions.
or Step 5. Select an Alternate Rotation
of Insert.
Use N for normal. Use 1, 2, 3, 4, or 5 for alternate rotation
of insert. See page 124 for descriptions.
or Step 6. Select an Alternate Rotation of Insert.
Use 1, 2, 3, 4, or 5 for alternate rotation of insert. No letter
required for normal (No rotation position).
See page 124 for descriptions.
For ordering information on accessories, such as protection caps and
backshell hardware, contact Amphenol Aerospace, Sidney, NY.
Step 7. Modification Number
Consult Amphenol Aerospace, Sidney, NY for information.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 127