10-503140-032 Datasheet, PDF (339/437 Pages) Amphenol Corporation – The Interconnection Leader

Amp_Ah_ee_ron_spo_acl_e
EMI/Transient Protection
Specials
The Hermetic Filter Connector
While only approximately 1/2 inch longer than standard series connectors, the her-
metic filter connector provides all the benefits of a hermetic connector, as well as EMI
protection for sensitive circuits. The filter assembly is protected by a fused glass insert
within a unique steel housing. This design accounts for the connector’s capability in
tolerating high level static pressure, while
maintaining a low level leakage rate.
Applications include pressurized test
equipment, environmental and toxic gas
chambers, and moisture sealing on
industrial equipment and missiles.
Filtered Plug
This connector is designed for
applications where EMI protection is
essential, but access to the receptacle
is denied. The filtered plug presents an
alternative for the electrical engineer.
The filter plug is designed with the same
Filtered Plug
components as a standard filter receptacle,
but offers the option of being mounted on the cable harness.
This device is a cost effective method of achieving
EMI protection when length restrictions
prohibit inclusion of an adapter to the system.
Hermetic Filter Connector
Filter Connectors can also incorporate high frequency coax,
twinax, triax, quadrax and differential twinax contacts.
Amphenol MIL-DTL-38999 Series III connectors are the most
commonly used connectors for incorporation of shielded
contacts along with traditional crimp contacts. High
performance shielded coaxial, twinax and triax contacts are
available to fit various RG and special cables. They eliminate
discontinuities or impedance variations due to movement of
parts under axial load. Size 8 quadrax and differential twinax
contacts provide high speed data transfers.
Filter Connectors with Coax Shielded Contacts
Filter Connectors with Flex Termination
Flex circuits are available for MIL-DTL-38999, MIL-DTL-5015 and
MIL-DTL-26482 filter connectors. They are offered in flat or sculptured
styles and provide flexibility in assembling to printed circuit boards.
Through Amphenol’s Advanced
Circuit Technology division, these
strong and rigid, yet highly flexible
circuits eliminate the need to
purchase and attach individual pins
or connectors. Thus they promote
system automation, reduce space
requirements and lower installation
costs. Sculptured^® Flexible Circuits
have built-in terminations which
eliminate the failure associated with
crimped or soldered-on contacts,
and geometrically fit the tight space
requirements within a unit.
Flex Circuitry for Attachment to
Printed Circuit Boards
MIL-DTL-38999 with Quadrax Contacts
For more information on these specials,
consult Amphenol Aerospace and see our website
at www.amphenol-aerospace.com.
338 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com