10-503140-032 Datasheet, PDF (428/437 Pages) Amphenol Corporation – The Interconnection Leader

Additional Circular Connectors
Amphenol
For a Wide Range of Applications, Military & Industrial
Aerospace
GT Series, Reverse Bayonet
Reference Catalog 12-024
APPLICATION
STANDARDS/
COUPLING/
REQUIREMENTS MOUNTING
GT Series
Utilizes
Heavy duty,
MIL-DTL-5015
rugged connector, inserts. UL
environmentally recognized.
resistant.
Intermateable
Preferred
with VG95234
connector for mass connectors.
transit. Also used
in mil-aero
applications such
as military vehicles.
Reverse bayonet
coupling (quick
mating, audible,
visual and tactile
full mating
indicators). Rated
to 2000 couplings
min. No lockwiring
required.
CONTACT
TERMINATION
Crimp or solder
termination.
OPTIONAL FEATURES
• Over 40 varieties of shell styles and backend accessory combinations.
• Optional insert materials: Neoprene, Viton*, or low smoke/flame retardant.
• Variety of conductive and non-conductive platings including non-cadmium.
• Resilient cover coupling nuts available for added damage protection and
increased gripping surface.
• Many contact types are available, including both gold and silver plating, and
alternate crimp barrel sizes.
• Available with RADSOK^® High Power Contacts- see page 429
MARKETS
• Rail/Mass Transportation
• Power Generation, Petro-Chemical
• Heavy Equipment, Geophysical
• Power and Control Lighting Trusses
• Military Vehicles
PERFORMANCE
ENVIRON./ELECT.
Operating temp. from
–55°C to +125°C. With
Viton inserts: –50°C to
+200°C. Resilient inserts
provide high dielectric
strength and moisture
barrier. IP67
performance in
environmental versions.
Resilient rubber covers
provide higher shock
and vibration capabilities.
Operating voltage to
3000 VAC (RMS) at
sea level.
GT-PC Series for High Power Applications
Reference Catalog 12-024
APPLICATION
STANDARDS/ COUPLING/
REQUIREMENTS MOUNTING
CONTACT
TERMINATION
PERFORMANCE
ENVIRON./ELECT.
GT-PC Series
Same standard
features as the
GT series, but
with “Dead Front”
pin contacts, size
0, recessed into
the socket insert.
Provides higher
amperage capabil-
ity and operator
OPTIONAL FEATURES
• Same shell styles offered as in standard
GT series family.
• Currently 5 insert patterns available.
safety by prevent-
ing inadvertent
contact with a live
contact.
• Wide selection of backend accessories available.
UL recognized.
Currently
available with 5
insert patterns
incorporating
size 0 contacts.
Reverse bayonet
coupling (quick
mating, audible,
visual and tactile
full mating indica-
tors). Rated to 2000
couplings min. No
lockwiring required.
Crimp termination.
Same performance
as GT series, but
special “Dead Front”
recessed contacts
provide higher
amperage levels
- up to 100 amps
per contact. These
special contacts also
prevent accidental
electrical shocks to
technicians. “First
Mate/”Last Break”
features on one or
more of the pins
provide additional
operator safety.
MARKETS
• High Voltage Power Distribution
GTC-M Series - The GT with Metal Clip Inserts
Reference Catalog 12-024.
Reference PDS-181
(Product Data Sheet)
APPLICATION
STANDARDS/ COUPLING/
REQUIREMENTS MOUNTING
CONTACT
TERMINATION
OPTIONAL FEATURES
GTC-M Series
Intermateable
Combines the GT and inter-
reverse bayonet mountable with
shell and the rear standard GT
release metal clip series.
retention system
which is used in the
Amphenol^®/Matrix^®
MIL-DTL-5015
connector. Provides
easier insertion/
removal of contacts
and improved envi-
ronmental sealing.
• 7 shell styles offered with all insert patterns available from standard
GT series family.
• Wide selection of backend accessories available.
Reverse bayonet
coupling (quick
mating, audible,
visual and tactile
full mating indica-
tors). Rated to 2000
couplings min. No
lockwiring required.
Captivated coupling
nut assembly
allows unmating
without the rear ac-
cessories attached.
Crimp or solder
termination.
MARKETS
• Mass Transportation
• Power Generation, Petro-Chemical
• Heavy Equipment, Geophysical
PERFORMANCE
ENVIRON./ELECT.
Operating temp. from
–55°C to +200°C.
Completely environ-
mentally sealed with
contact seals, gaskets,
wire seals and
insert-to-shell seals.
IP67 rating for
environmental sealing.
Operating voltage to
3000 VAC (RMS) at
sea level.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 427