10-503140-032 Datasheet, PDF (111/437 Pages) Amphenol Corporation – The Interconnection Leader

Amp_Ah_ee_ron_spo_acl_e
MIL-DTL-26482, Series 2, Matrix^®
Bayonet Coupling Connectors
With Crimp Rear Release Contacts
Amphenol Aerospace offers the Matrix^® Product line of
MIL-DTL-26482*, Series 2 connectors.
This series provides a bayonet coupling connector with crimp
rear insertable, rear releasable contacts.
DESIGN CHARACTERISTICS
• Medium size, environmentally resistant connector
• Recommended operating voltage to 1,000 VAC (RMS)
at sea level
• Quick positive coupling assured by 3 point bayonet
coupling system
• Visual confirmation of complete coupling
• Eliminates mismating by the use of five key/keyway design
• Insertion and removal of contacts from the rear of the
con­nector assures no damage to the front that might affect
the sealing characteristics
• Utilizes same standard qualified rear-release type plastic
tool for contact insertion and removal
• Contacts are qualified to SAE AS39029** requirements
– BIN coded (three color bands), and are crimped with
standard crimp tools per MIL-DTL-22520
• Grommets are constructed of tear-resistant elastomer
and experience no degradation when exposed to a broad
range of fluids
• Sealing over a range of wire diameters is assured by a
trip­ le webbed grommet at the rear of the connector
• Closed entry socket side of the insert is designed with a
lead-in chamfer and a hard face that will accept a pin
con­tact bent within pre-established limits
• Elastomer interfacial seal on the pin side has raised
barri­ers around each pin which displace into the socket
cham­fer when mated, providing a positive moisture seal
CUSTOMER OPTIONS
• Shell styles within this family include: Wall mount with
either a narrow or a wide flange, jam nut single hole mount,
and cable connecting receptacles, along with standard
plugs or plugs with RFI grounding fin­gers, in shell
sizes 8 to 24
• MS and Proprietary versions available
• Accommodation of contact sizes 20, 16 and 12
• 34 insert arrangement patterns available, accommodating
from a minimum of 3 to a maximum of 55 circuits
• Alternate positioning available
• Various finishes are available (for information on
non-cad­mium zinc alloy plating, consult Amphenol
Aerospace, Sidney, NY)
* MIL-DTL-26482 supersedes MIL-C-26482
** SAE AS39029 supersedes MIL-C-39029
MS3470
wall mounting receptacle
with narrow flange
MS3472
wall mounting receptacle
with wide flange
MS3471
cable connecting
receptacle
MS3474
jam nut receptacle
MS3476
straight plug
MS3475
plug with RFI grounding
fingers
110 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com