10-503140-032 Datasheet, PDF (121/437 Pages) Amphenol Corporation – The Interconnection Leader

Amp_Ah_ee_ron_spo_acl_e
Additional MIL-DTL-26482 Circular Connectors
from Amphenol
MIL-DTL-26482, Series 1
Connectors
There are several additional connector
types within the Amphenol^®
MIL-DTL-26482 fam­ily. MIL-Spec and
commercial versions are available with
varying design characteris­tics and
customer options to meet cost
considerations and to provide users with
the most design flexibility possible.
MIL-DTL-26482, Series 1 Circular connectors are shown
in detail in Amphenol Industrial Operations’ catalog
12-070, which can be supplied upon request or visit www.
amphenol-industrial.com.
Briefly the MIL-DTL-26482 Series 1 circulars are
described as follows:
PT, SP, MS/PT
Commercial/MIL-DTL-26482, Series 1
These are bayonet type with solder contacts. Both the
insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the
gasket and superior electrical isolation of the contact in
the inserts.
Socket contacts are closed entry design. Printed circuit
board contacts are also available in this series.
The SP is a modification of the PT providing special shells
with a wide mounting flange for back panel mounting. The
SP also has a durable non-conductive hard anodic
“Alumi­lite” coating which provides abrasion and corrosion
protec­tion.
There are 8 shell styles in the PT, SP and MS/PT series,
and shell sizes are 6-24. The PT solder is UL recognized.
Her­metics are also available.
PT-SE, SP-SE, MS/PT-SE
Commercial/MIL-DTL-26482, Series 1
These are a derivative of the PT line, bayonet type.
How­ever, they incorporate crimp contacts that are rear
insert­able, front releasable. An MS approved spring tower
retention system holds the contacts in place.
PT-CE, SP-CE
Commercial crimp type
Another derivative of the PT line, bayonet type. These also
have crimp contacts that are rear insertable, front
releasable, but the contacts are held in place by a nylon
wafer retention system. The voidless one-piece insert and
grom­met assembly provide continuous dielectric
separation between contacts.
PC, PC-SE, PC-CE
Commercial solder and crimp type
The PC series within the Amphenol^® miniature circular
family is threaded coupling, rather than bayonet coupling.
The threads are double-stubbed so they can not be
cross threaded.
The PC is offered with solder contacts. The PC-SE has
crimp contacts in a spring tower retention system, while
the PC-CE has crimp contacts in a nylon wafer retention
system. Hermetics are available
All miniature circular are intermateable and
intermountable with each other except for the threaded
coupling PC Series.
For further information ask for catalog 12-070. Consult
Amphe­nol Industrial Operations, Sidney, NY for any
assistance on these products or for any specific
application needs. See catalog 12-070 online at www.
amphenol-industrial.com
120 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com