10-503140-032 Datasheet, PDF (186/437 Pages) Amphenol Corporation – The Interconnection Leader

MIL-DTL-5015 Crimp Rear Release
How to Order
Amphenol
Aerospace
MIL-DTL-5015 with rear
release crimp contacts
MILITARY
COMMERCIAL
1.
Connector
Type
MS
944
2.
Shell
Style
3456
6
3.
Service
class
L
F
4.
Shell Size–
Insert Arrangement
16S–8
16S–8
5. 6.
Contact Alternate
Types Positions
P
W
P
W
7.
Modification
Number
NA
(XXX)
Step 1. Military Connector Type
MS ^{Designates Military Standard}
Step 2. Select a Shell Style
THREADED COUPLING CONNECTORS
3450 ^{Wall mounting receptacle}
3451 ^{Cable connecting receptacle}
3452 ^{Box mounting receptacle}
3454 ^{Jam nut receptacle}
3456 ^{Straight plug}
3459 ^{Straight plug with self-locking coupling nut}
Step 3. Select a Service Class
L ^{Aluminum shell, electroless nickel finish, fluid}
resis­tant insert
W ^{Aluminum shell, cadmium olive drab finish, fluid}
resistant insert
LS ^{Stainless steel shell, passivated, fluid resistant}
insert
Firewall Styles only available for 3450, 3456, 3459 per mil spec:
KT ^{Firewall, steel shell, cadmium/olive drab finish,}
non-flammable hard dielectric and fluid resistant
insert
KS ^{Firewall, stainless steel shell, passivated, non-flam­}
mable hard dielectric and fluid resistant insert
Step 1. Select a Commercial Connector Type
944 ^{Designates Amphenol/Matrix Commercial Series}
981 ^{Designates self locking/Quick disconnect (+)(-)}
lanyard
Step 2. Select a Shell Style
THREADED COUPLING CONNECTORS
0 ^{Wall mounting receptacle}
1 ^{Cable connecting receptacle}
2 ^{Box mounting receptacle}
4 ^{Jam nut receptacle}
6 ^{Straight plug}
Self Locking/Quick disconnect (981) styles:
6 ^{Straight plug with self-locking coupling nut}
7 ^{Quick disconnect plug with lanyard}
8 ^{Quick disconnect plug without lanyard}
Step 3. Select a Service Class
A
Aluminum shell, black anodized finish,
fluid resis­tant insert
F
Aluminum shell, electroless nickel finish,
fluid resistant insert
W
Aluminum shell, cadmium olive drab finish,
fluid resistant insert
FS ^{Stainless steel shell, passivated, fluid resistant insert}
KT
Firewall, steel shell, cadmium/olive drab finish,
non-flammable hard dielectric and fluid resistant insert
KS
Firewall, stainless steel shell, passivated, non-flam­
mable hard dielectric and fluid resistant insert
Note:

Class L inactivates older Class U.
Class K is inactive and has been replaced by Class KT
for all applications.
Step 4. Select a Shell Size &
Insert Arrangement see pages 172 &173
Shell Size & Insert Arrangements are on pages 172 &173.
First number represents Shell Size,
second number is the Insert Arrangement.
Step 5. Select a Contact Type
Designates
P ^Pin
S ^Socket
A ^{Less pins}
B ^{Less sockets}
Step 6. Alternate Positions
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position. See page 184 for description of
alternate positions.
Step 4. Select a Shell Size &
Insert Arrangement see pages 172 & 173
Shell Size & Insert Arrangements are on pages 172 & 173.
First number represents Shell Size,
second number is the Insert Arrangement.
Step 5. Select a Contact Type
Designates
P ^Pin
S ^Socket
Step 6. Alternate Positions
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position. See page184 for description of
alternate positions.
Step 7. Modification Number
Consult Amphenol, Sidney, NY for information.
For strain reliefs use the following modification codes:
(189) E-nut M85049/31 configuration
(190) Straight strain relief M85049/52 configuration
(191) 90° strain relief M85049/51 configuration
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 185