10-503140-032 Datasheet, PDF (430/437 Pages) Amphenol Corporation – The Interconnection Leader

Additional Circular Connectors
Amphenol
For a Wide Range of Applications, Military & Industrial
Aerospace
Amphe-Power^TM GT,Amphe-Power^TM 5015 (AC)
Reference Brochure SL-391
APPLICATION
STANDARDS/ COUPLING/
REQUIREMENTS MOUNTING
CONTACT
TERMINATION
PERFORMANCE
ENVIRON./ELECT.
High amperage
capability connec-
tors designed for
the most demand-
GT and 5015
(AC) connec-
tors enhanced
with RADSOK^®
Amphe-Power GT
is reverse bayonet
coupling. Amphe-
Power 5015 is
Crimp termination.
RADSOK^® con-
tacts, available in
size 8 (69 amps),
Amphe-Power connec-
tors are all 5015 type
performance. Operat-
ing temp. from –55°C
Amphe-Power GT
ing industrial and contacts
transportation
(hyperbolic,
threaded coupling. _{size 4 (120 amps),} to +125°C. GT and
and size 0 (250 ^{5015 styles are IP67}
applications.
stamped grid
amps).
similar performance
Amphe-Power GT
designation:
GT( )RDS
Amphe-Power AC
configura-
tion within the
socket) that
handle up to
For RADSOK^®
contact advantag-
es, see page 79.
in environmental ver-
sions. Current Amphe-
Power lines support
from 50A to over 500A
designation:
150% higher
continuous duty.
Amphe-Power 5015 AC
OPTIONAL FEATURES
AC( )R( ) desig-
nation
amperages
than standard
contacts.
• Most shell styles available in GT family and in AC 5015
MARKETS
• Hybrid arrangements with RADSOK and power contacts tailored to meet customer needs.
• Power Generation, Petro-Chemical
• Mass Transportation
* Amphenol AC Threaded Series- Reference catalog 12-025
Amphenol AC-B Reverse Bayonet Series - Reference 12-027
Amphe-Power^TMComposite Amphe-GTR
Reference Brochure SL-391
APPLICATION
STANDARDS/ COUPLING/
REQUIREMENTS MOUNTING
OPTIONAL FEATURES
• Currently available in shell size 32 with 4 or
5AWG contacts. Consult Amphenol Power
Solutions for future sizes and patterns.
Amphe-GTR
GT connector
with RADSOK^®
high amperage
sockets. The plug
shell, coupling nut,
receptacle and
hardware are all
high performance
molded composite
material.
Listed per
Reverse bayonet
UL1977/UL1682/ coupling.
UL817. Meets
all the
specifications
for high power
process control
and server
applications.
MARKETS
• Factory Automation
• Rail/Mass Transportation
• Process Control
CONTACT
TERMINATION
PERFORMANCE
ENVIRON./ELECT.
Compression
Meets same perfor-
(setscrew) wire mance levels as GT
termination to
series.(See page
the 4/6AWG or 427). RADSOK^®
8/10AWG conduc- contacts enable
tors allows easy increased current
field replacement ratings to 120A on
of pin or socket individual contacts.
contacts,
Utilizes a standard
or complete plug PG adapter to
and receptacle achieve IP67 seal
assemblies,
rating. Flammable
without requiring rated to UL94V-0.
specialized tooling.
Class “L”, MIL-DTL-22992
Reference Catalog 12-052
APPLICATION
STANDARDS/ COUPLING/
REQUIREMENTS MOUNTING
CONTACT
TERMINATION
PERFORMANCE
ENVIRON./ELECT.
Class L Military Qualified to
Double stub
Crimp termination.
MS90555 and
MIL-DTL-22992. threaded per
Contacts can be
Proprietary desig- Within the
MIL-STD-1373 for soldered.
nations.
controlled
fast coupling, easy
Heavy duty, rug- parameters of cleaning. 5 key po-
ged, environmental mil-spec - shell larizing system as-
circulars designed size relationship sures that circuits
to meet the heavi- to current car- with incompatible
est electrical loads rying capacity power characteris-
for military or indus- to reduce the tics (voltage, phase
trial applications. possibility of
and frequency) are
Current ranges of inadequate
not mated.
OPTIONAL FEATURES
40 to 200 amps, wiring for heavy Rated to 500
conductor sizes 6 electrical loads. complete mating/
• Direct current or single/three phase, ^{to 4/0.}
unmating cycles.
60/400 Hertz alternating current.
Automatic ground-
• 4 shell styles with 7 insert patterns that ^{ing for safety.}
facilitate large conductors.
MARKETS
• Accessories have left hand threads to minimize
• Military ground vehicles/Mobile facilities
cable twisting, wire breakage, accidental connector disassembly.
• Geophysical/Heavy equipment
• Conductive and non-conductive finishes available.
• Power distribution systems
Operating temp. from
–55°C to +125°C.
Unique arc quenching
capability provides a positive
safety feature if connectors
are inadvertently discon-
nected under load.
Programmed coupling
sequence - grounding and
neutral contacts engage
before power contacts.
Grommets and seals provide
waterproofing. Rugged
shells are resistant to vibra-
tion, high impact, shock and
corrosion.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 429