10-503140-032 Datasheet, PDF (408/437 Pages) Amphenol Corporation – The Interconnection Leader

MIL-DTL-5015, MIL-DTL-22992 Circular
Connector Overview
Amphenol
Aerospace
Amphenol’s medium to heavy weight circular include the MS/Standard
MIL-DTL-5015 series and the heaviest weight, largest size circular is the Heavy
Duty MIL-DTL-22992 series. These time-tested circulars have been used for
several years. They are dependable general duty and environmen­tally resistant
connectors for military and industrial applications.
Shielded coax contacts, although more popularly used in 38999 types and 26482
types, can be incorporated into some arrangements of the 5015 and 22992 type
circulars. Shielded coaxial contacts within these series are considered MS
modifications to the MIL-spec connector and the coax contacts are pre-installed
in the connector. Normal operating voltage with power contacts only is up to 3000
VAC (RMS) at sea level for MIL-DTL-5015 circulars. The Heavy Duty types are
designed for high current capacity and have current ratings (with power contacts
only) of up to 200 amps.
Standard and Heavy Duty Circular offer these features for contact
termination flexibility:
• Insert arrangements that can incorporate:
• Size 4, 8 & 12 Crimp Coax contacts, pre-installed in the connector
• Wide selection of connector shell styles and sizes
• Standard power contact options within the various connector styles include: solder type,
crimp front release, crimp rear release
• Coax contacts are designed to the same high performance standards as power contacts.
Coax and power contacts may be intermixed with no degrada­tion of connector reliability.
MS/Standard MIL-DTL-5015 Type Connectors
Amphenol^® MS/Standard Circular
MIL-DTL-5015* Type Connector Family:
See MS/Standard catalog 12-020 for complete information on these styles
MS-A, MS-C, MS-E, MS-F, MS-R
• Produced in strict accordance with MIL-DTL-5015
• Threaded coupling, solder or crimp rear insertion contacts
(coax available in crimp type only)
• Class A, Solid Shell - intended for general connector usage
• Class C, Pressurized - for use on pressurized bulkheads or
pressure barriers
• Class E/F, Environmental Resisting - ideally suited for installation
where condensation, vibration and rapid changes in pressure or
tem­perature are considerations
• Class R, Lightweight Environmental Resisting - shorter in length
and lighter in weight than Class E
Heavy Duty QWLD,
MIL-DTL-22992 Connectors
Amphenol^® Heavy Duty Circular
MIL-DTL-22992 Connector Family:
QWLD
• Designed for most power and control circuits
• Military MIL-DTL-22992 qualified versions and proprietary equivalents
See Catalog 12-052 for complete information on these styles.
QWL
• A more compact heavy duty design for industrial power and control
appli­cations
See Catalog 12-053 for complete information on these styles.
GENERAL ORDERING INFORMATION
Amphenol MS/Standard MIL-DTL-5015 type and Heavy Duty MIL-DTL-22992 type circulars are normally supplied with a full complement
of power contacts, separately packaged. Coax contacts are ordered by part number as referenced in the part number charts on the
following pages of this catalog, and are substituted for the power contacts at the time of the cable or equipment assembly. Coax contacts
are pre-installed in these series. Installation instructions for the coax contacts for these series are provided in Amphenol document L-650.
HOW TO ORDER:
1. Select the coax contacts designed for the cable being used from the chart on page 409 of this catalog.
Select a connector insert from those shown on page 44 which will accommodate the quantity and size of coaxial contacts needed plus
any power contacts required.
2. Determine the MS/Standard or Heavy Duty Series style desired. (See features of each series referenced above). The catalog referenced
for each series will guide you in determining shell style, finish, service class and insert rotation required for your application.
MS/Standard MIL-DTL-5015 Type Connectors (Catalog 12-020 on-line at www.amphenol-industrial.com)
Catalog 12-052 - MIL-DTL-22992 QWLD Connectors (on-line at www.amphenol-aerospace.com)
Catalog 12-053 - QWL Connectors (currently not on-line; consult Amphenol Aerospace for hardcopy)
3. Consult Amphenol, Sidney, NY with the pertinent cable, contact, insert arrangement and connector style choices for complete connector
part number.
* Amphenol also offers the following other MIL-DTL-5015 Circular Connectors which are threaded coupling
(consult Amphenol Industrial for availability of shielded contacts in any of these series):
• Amphenol^®/Matrix^® MIL-DTL-5015 with crimp rear releasable and rear insertable contacts. (See Matrix 5015 section of this catalog)
• Amphenol^® MIL-DTL-5015 Modifications (Ask for Industrial Catalog 12-021)
• Amphenol^® GT Series with reverse bayonet coupling (Ask for Catalog 12-024)
NOTE:
• Amphenol^® AC Threaded and AC-B Bayonet Series
MIL-DTL-5015 supersedes MIL-C-5015
  (Ask for Industrial Catalog 12-025)
MIL-DTL-22992 supersedes MIL-C-22992
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 407