10-503140-032 Datasheet, PDF (153/437 Pages) Amphenol Corporation – The Interconnection Leader

Amp_Ah_ee_ron_spo_acl_e
MIL-DTL-83723, Series III, Pyle^®
How to Order – ASD Designation
MIL-DTL-83723,
Series III
ASD DESIGNATION
1.
Connector
Type
EN2997
2.
Service
Class
KE
3.
Shell
Style
6
4.
Shell Size/Insert
Arrangement
16-24
5.
Contact
Style
F
6.
Alternate Keying
Position of Shell
6
Step 1. Select an ASD Designated/European
Standards Connector Type
EN2997
Designates
ASD Designation
Note: ASD supersedes AECMA Designation
Step 2. Select a Service Class
Designates Standard Temperature Class
K Threaded, Stainless Steel, 200°C
S Threaded, Stainless Steel, EMI Grounding Spring on Plug, 200°C
Y Stainless Steel Hermetic with Solderwell Contacts, 200°C
Designates High Temperature Class
KE Threaded, Stainless Steel Firewall, 260°C
SE Threaded, Stainless Steel, EMI Grounding Spring on Plug, 260°C
YE Stainless Steel Hermetic with Solderwell Contacts, 260°C
Step 3. Select a Shell Style
Designates
0
Threaded, Square Flange Receptacle
1
Threaded, Solder Mount Receptacle, Hermetic only
6
Threaded Non-Decoupling Plug
7
Threaded Jam Nut (D-Hole Mount) Receptacle
Step 4. Select a Shell Size & Insert
Arrangement from chart on pg. 146.
Shell Size & Insert Arrangements are on page 146. First
number represents Shell Size, second number is the Insert
Arrangement.
Step 5. Select a Contact Type (Crimp)
Designates
M ^{Standard Pin Contacts}
C ^{#20 Pins with #18 crimpwell}
A ^{Pin Insert less Contacts}
F ^{Standard Socket Contacts}
D ^{#20 Sockets with #18 crimpwell}
B ^{Socket Insert less Contacts}
Step 6. Select an Alternate Keying Position -
Rotation of master key/keyway of shell.
Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying
positions. See page 146 for descriptions.
152 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com