10-503140-032 Datasheet, PDF (48/437 Pages) Amphenol Corporation – The Interconnection Leader

MIL-DTL-38999, Series I LJT
MIL-DTL-38999, Series II JT
How to Order (Commercial)
Amphenol
Aerospace
Step 3. Select a Service Class
1.
Connector
Type
2.
Shell Style
3.
Service
Class
RX
4.
Shell Size-
Insert Arrg.
5.
Contact Type
6.
Alternate
Position
7.
Special
Variations
Commercial Solder Contacts/Connectors
P
Potting applications: These connectors are supplied with a potting boot. All shells
are designed with integral features to retain potting boots.
A
General Applications
A (SR)
C
C (SR)
E
Threaded rear design with strain relief†
Pressurized applications
Threaded rear design with strain relief.†
Box mount and thru-bulkhead only with no backend threads.
H
Hermetic applications- Fused compression glass sealed inserts. Leadage rate less
than .01 micron cu. ft./hr. (1 x 10-7 cc/sec.) at 15 psi differential.
Y
Same as “H” with interfacial seal.
T
MS27599A applications-general duty, pressurized (receptacle only)
Commercial Crimp Contacts/Connectors
RP
Potting crimp applications. Supplied with spacer grommet and potting boot.††
RE
RGF
Environmental crimp applications. Supplied with a grommet and compression nut.†
Can be supplied with strain relief integral with compression nut “RE(SR)”.
(JT Series only)
Electroless nickel plated ground plane aluminum, 200°C
RGW
Olive drab cadmium plated ground plane aluminum, 175°C
RT
Environmental applications. Supplied without rear accessories. Design provides
serrations on rear threads of shells.
† Not applicable to box mounting style or LJT Series I.
†† Not applicable to box mounting style.
Step 4. Select a Shell Size &
Insert Arrangement see page 4-7
Shell Size & Insert Arrangements are on pages 4-7.
First number represents Shell Size,
second number is the Insert Arrangement.
Step 5. Select a Contact Type
Designates
P Pin Contacts
S Socket Contacts
1.
Connector
Type
2.
Shell Style
3. 4. 5.
Service Class
Shell Size-
Insert Arrg.
22-2
Contact Type
6.
Alternate
Position
7.
Special
Variations
1.
Connector
Type
2.
Shell Style
3.
Service Class
4.
Shell Size-
Insert Arrg.
5.
Contact
Type
P
6.
Alternate
Position
7.
Special
Variations
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 47