DS893 Datasheet, PDF (3/77 Pages) Xilinx, Inc – DC and AC Switching Characteristics

Virtex UltraScale FPGAs Data Sheet: DC and AC Switching Characteristics
Table 2: Recommended Operating Conditions⁽¹⁾⁽²⁾
Symbol
Description
FPGA Logic
V_CCINT
Internal supply voltage for 0.95V devices.
Internal supply voltage for 1.0V devices.
V_{CCINT_IO(3)}
Supply voltage for the 0.95V device I/O banks.
Supply voltage for the 1.0V device I/O banks.
V_CCBRAM
Block RAM supply voltage for 0.95V devices.
Block RAM supply voltage for 1.0V devices.
V_CCAUX
V_CCO(4)(5)
Auxiliary supply voltage.
Supply voltage for HR I/O banks.
Supply voltage for HP I/O banks.
V_{CCAUX_IO(6)}
V_IN(7)
Auxiliary I/O supply voltage.
I/O input voltage.
dI/iOffeirnepnuttiavl ^{oIl/tOagseta(nwdhaerndsVeC}x^Cc^Oe=pt3T.M3VD)Sf_o3r3V^(8R)E.^{F and}
I_IN(9)
Maximum current through any pin in a powered or
unpowered bank when forward biasing the clamp diode.
V_BATT(10)
Battery voltage.
GTH or GTY Transceiver
Analog supply voltage for the GTH transceiver.
V_MGTAVCC(11)
Analog supply voltage for the GTY transceiver operating at
line rates ≤28.21 Gb/s.
Analog supply voltage for the GTY transceiver operating at
line rates >28.21 Gb/s.
Analog supply voltage for the GTH transmitter and receiver
termination circuits.
V_MGTAVTT(11)
V_{MGTVCCAUX(11)}
Analog supply voltage for GTY receiver and transmitter
termination circuits with the transceiver operating at line
rates ≤28.21 Gb/s.
Analog supply voltage for GTY receiver and transmitter
termination circuits with the transceiver operating at line
rates >28.21 Gb/s.
Auxiliary analog QPLL voltage supply for the transceivers
Analog supply voltage for the resistor calibration circuit of
the GTH transceiver column.
Analog supply voltage for the resistor calibration circuit of
V_{MGTAVTTRCAL(11)}
the GTY transceiver
Gb/s.
column operating at
line
rates ≤28.21
Analog supply voltage for the resistor calibration circuit of
the GTY transceiver column operating at line rates >28.21
Gb/s.
Min
0.922
0.970
0.922
0.970
0.922
0.970
1.746
1.140
0.950
1.746
–0.200
–
–
1.000
0.970
0.970
1.000
1.170
1.170
1.200
1.750
1.170
1.170
1.200
Typ
Max
Units
0.950
0.979
V
1.000
1.030
V
0.950
0.979
V
1.000
1.030
V
0.950
0.979
V
1.000
1.030
V
1.800
1.854
V
–
3.400
V
–
1.890
V
1.800
1.854
V
–
V_CCO + 0.200 V
0.400
2.625
V
–
10.000
mA
–
1.890
V
1.000
1.030
V
1.000
1.030
V
1.030
1.060
V
1.200
1.230
V
1.200
1.230
V
1.230
1.260
V
1.800
1.850
V
1.200
1.230
V
1.200
1.230
V
1.230
1.260
V
DS893 (v1.7.1) April 4, 2016
Product Specification
www.xilinx.com
Send Feedback
3