DS893 Datasheet, PDF (1/77 Pages) Xilinx, Inc – DC and AC Switching Characteristics

Virtex UltraScale FPGAs Data Sheet:
DC and AC Switching Characteristics
DS893 (v1.7.1) April 4, 2016
Product Specification
Summary
The Xilinx® Virtex® UltraScale™ FPGAs are available in -3, -2, -1 speed grades, with -3 having the highest
performance.
DC and AC characteristics are specified in commercial, extended, and industrial temperature ranges.
Except the operating temperature range or unless otherwise noted, all the DC and AC electrical
parameters are the same for a particular speed grade (that is, the timing characteristics of a -1 speed
grade industrial device are the same as for a -1 speed grade commercial device). However, only selected
speed grades and/or devices are available in each temperature range.
All supply voltage and junction temperature specifications are representative of worst-case conditions.
The parameters included are common to popular designs and typical applications.
This data sheet, part of an overall set of documentation on the UltraScale architecture-based devices, is
available on the Xilinx website at www.xilinx.com/ultrascale.
DC Characteristics
Table 1: Absolute Maximum Ratings⁽¹⁾
Symbol
Description
FPGA Logic
V_CCINT
V_{CCINT_IO(2)}
V_CCAUX
V_CCBRAM
V_CCO
V_{CCAUX_IO(3)}
V_REF
Internal supply voltage.
Internal supply voltage for the I/O banks.
Auxiliary supply voltage.
Supply voltage for the block RAM memories.
Output drivers supply voltage for HR I/O banks.
Output drivers supply voltage for HP I/O banks.
Auxiliary supply voltage for the I/O banks.
Input reference voltage.
I/O input voltage for HR I/O banks⁽⁵⁾.
V_IN(4)(6)(7)
I/O input voltage for HP I/O banks.
Is/tOanidnaprudtsveoxltcaegpet(TwMhDenS_V3_C3C(O8)=. 3.3V) for V_REF and differential I/O
V_BATT
I_DC
I_RMS
Key memory battery backup supply.
Available output current at the pad.
Available RMS output current at the pad.
Min
Max
Units
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.400
–0.550
–0.400
–0.500
–20
–20
1.100
V
1.100
V
2.000
V
1.100
V
3.400
V
2.000
V
2.000
V
2.000
V
V_CCO + 0.550 V
V_CCO + 0.550 V
2.625
V
2.000
V
20
mA
20
mA
© Copyright 2014–2016 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated brands included herein are trademarks of
Xilinx in the United States and other countries. All other trademarks are the property of their respective owners.
DS893 (v1.7.1) April 4, 2016
Product Specification
www.xilinx.com
Send Feedback
1