English
Language : 

DS680 Datasheet, PDF (2/36 Pages) Xilinx, Inc – Space-Grade Virtex-4QV FPGAs
R
Space-Grade Virtex-4QV FPGAs: DC and Switching Characteristics
Table 2: Recommended Operating Conditions
Symbol
Description
Min
Max
VCCINT
Internal supply voltage relative to GND
VCCAUX
Auxiliary supply voltage relative to GND
VCCO(1,2,3,4,5)) Supply voltage relative to GND
3.3V supply voltage relative to GND
VIN
2.5V and below supply voltage relative to GND
VBATT(2)
Battery voltage relative to GND
1.14
1.26
2.375
2.625
1.14
3.45
GND – 0.20
3.45
GND – 0.20 VCCO + 0.2
1.0
3.6
Notes:
1. Configuration data is retained even if VCCO drops to 0V.
2. VBATT is required only when using bitstream encryption. If battery is not used, connect VBATT to either ground or VCCAUX.
3. For 3.3V I/O operation, refer to the Virtex-4 FPGA User Guide.
4. Includes VCCO of 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V.
5. The configuration output supply voltage VCC_CONFIG is also known as VCCO_0.
Units
V
V
V
V
V
V
Table 3: DC Characteristics Over Recommended Operating Conditions
Symbol
Description
Min
VDRINT
Data retention VCCINT voltage
(below which configuration data might be lost)
0.9
VDRI
Data retention VCCAUX voltage
(below which configuration data might be lost)
2.0
IREF
VREF current per pin
IL
Input or output leakage current per pin (sample-tested)
CIN
Input capacitance (sample-tested)
Pad pull-up (when selected) @ VIN = 0V, VCCO = 3.3V
5
Pad pull-up (when selected) @ VIN = 0V, VCCO = 3.0V
5
IRPU(1)
Pad pull-up (when selected) @ VIN = 0V, VCCO = 2.5V
5
Pad pull-up (when selected) @ VIN = 0V, VCCO = 1.8V
5
Pad pull-up (when selected) @ VIN = 0V, VCCO = 1.5V
5
IRPD(1)
Pad pull-down (when selected) @ VIN = VCCO
5
IBATT(1)
Battery supply current
PCPU
Power dissipation of PowerPC® 405 processor block
n
Temperature diode ideality factor
r
Series resistance
Notes:
1. Typical values are specified at nominal voltage, 25°C.
Typ
75
0.45
1.02
2
Max
10
10
10
200
125
120
60
40
100
Units
V
V
µA
µA
pF
µA
µA
µA
µA
µA
µA
nA
mW/
MHz
n
Ω
DS680 (v2.0) April 12, 2010
www.xilinx.com
Product Specification
2