W83977F Datasheet, PDF (42/181 Pages) Winbond – PLUG & PLAY 1.0A COMPLIANT

W83977F/ W83977AF
PRELIMINARY
2.2 Register Descriptions
There are several status, data, and control registers in W83977F/ AF. These registers are defined
below:
ADDRESS
OFFSET
READ
REGISTER
WRITE
base address + 0
SA REGISTER
base address + 1
base address + 2
SB REGISTER
DO REGISTER
base address + 3
base address + 4
TD REGISTER
MS REGISTER
TD REGISTER
DR REGISTER
base address + 5
DT (FIFO) REGISTER
DT (FIFO) REGISTER
base address + 7
DI REGISTER
CC REGISTER
2.2.1 Status Register A (SA Register) (Read base address + 0)
This register is used to monitor several disk interface pins in PS/2 and Model 30 modes. In PS/2
mode, the bit definitions for this register are as follows:
765 43 ²¹ 0
INIT PENDING (Bit 7):
This bit indicates the value of the floppy disk interrupt output.
DIR
WP
INDEX
HEAD
TRAK0
STEP
DRV2
INIT PENDING
DRV2 (Bit 6):
0 A second drive has been installed
1 A second drive has not been installed
STEP (Bit 5):
This bit indicates the complement of STEP output.
TRAK0 (Bit 4):
This bit indicates the value of TRAK0 input.
Publication Release Date: March 1998
-31 - Revision 0.58