W83977F Datasheet, PDF (150/181 Pages) Winbond – PLUG & PLAY 1.0A COMPLIANT

W83977F/ W83977AF
10.10 Logical Device 8 (Auxiliary I/O Part II)
PRELIMINARY
CR30 (Default 0x00)
Bit 7-1 : Reserved.
Bit 0 : = 1 Activates the logical device.
= 0 Logical device is inactive.
CR31
Bit 7-2 : Reserved.
Bit 1 : ENRNGCK -- > Enable I/O Range check
Bit 0 : FORIORD --> Forces LDN to respond I/O read
CR60, CR 61 (Default 0x00, 0x00)
These two registers select GP2 & Watch Dog I/O base address [0x100:0xFFE] on 2 byte
boundaries. I/O base address + 1 : Watch Dog I/O base address.
CR70 (Default 0x00)
Bit 7-4 : Reserved.
Bit 3-0 : These bits select IRQ resource for Common IRQ of GP20~GP25 at Logic Device 9.
CR71 (Default 0x02)
Bit 7-2 : Reserved.
Bit 1 : IRQLEV -- > IRQ Level
= 1: High; = 0: Low
Bit 0 : IRQTYPE --> IRQ Type
= 1: Level trigger; 0: Edge trigger
CR72 (Default 0x00)
Bit 7-4 : Reserved.
Bit 3-0 : These bits select IRQ resource for Watch Dog.
CR73
Bit 7-2 : Reserved.
Bit 1 : IRQLEV -- > IRQ Level
= 1: High; = 0: Low
Bit 0 : IRQTYPE --> IRQ Type
= 1: Level trigger; = 0: Edge trigger
CRE8 (GP20, Default 0x01)
Bit 7-5 : Reserved.
Bit 4-3 : Select Function.
= 00 Select basic I/O function
= 01 Reserved
= 10 Select alternate function : Keyboard Reset (connected to KBC P20)
= 11 Reserved
Bit 2 : Int En
= 1 Enable Common IRQ
= 0 Disable Common IRQ
Bit 1 : Polarity : 1 : Invert, 0 : No Invert
Bit 0 : In/Out : 1 : Input, 0 : Output
- 138 -
Publication Release Date: March 1998
Revision 0.58