English
Language : 

W83977F Datasheet, PDF (27/181 Pages) Winbond – PLUG & PLAY 1.0A COMPLIANT
W83977F/ W83977AF
PRELIMINARY
1.6 FDC Interface
SYMBOL
DRVDEN0
DRVDEN1
GP10
(IRQIN1)
P12
DSRC
HEAD
WE
WD
STEP
DIR
MOB
DSA
DSB
MOA
DSKCHG
RDATA
WP
TRAK0
PIN I/O
FUNCTION
2 OD24 Drive Density Select bit 0.
3 OD24 Drive Density Select bit 1.
Alternate Function 1: General purpose I/O port 1, bit 0. It can be
configured as an interrupt channel.
Alternate Function 2: Keyboard P12 I/O port.
Alternate Function 3: DSR input of UART C [W83977AF only]
5 OD24 Head select. This open drain output determines which disk drive
head is active.
9 OD24 LWorgitiec e1n=abslied.e A0;n Loopgeinc d0ra=insidoeut1put.
10 OD24 Write data. This logic low open drain writes precompensation serial
data to the selected FDD. An open drain output.
11 OD24 Step output pulses. This active low open drain output produces a
pulse to move the head to another track.
12 OD24 Direction of the head step motor. An open drain output.
Logic 1 = outward motion; Logic 0 = inward motion
13 OD24 Motor B On. When set to 0, this pin enables disk drive 1. This is an
open drain output.
14 OD24 Drive Select A. When set to 0, this pin enables disk drive A. This is
an open drain output.
15 OD24 Drive Select B. When set to 0, this pin enables disk drive B. This is
an open drain output.
16 OD24 Motor A On. When set to 0, this pin enables disk drive 0. This is an
open drain output.
4 INcs Diskette change. This signal is active low at power on and when the
diskette is removed. This input pin is pulled up internally by a 1 KΩ
resistor, which can can be disabled by bit 7 of L0-CRF0
(FIPURDWN).
6 INcs The read data input signal from the FDD. This input pin is pulled up
internally by a 1 KΩ resistor, which can be disabled by bit 7 of L0-
CRF0 (FIPURDWN).
7 INcs Write protected. This active low Schmitt input from the disk drive
indicates that the diskette is write-protected. This input pin is pulled
up internally by a 1 KΩ resistor, which can be disabled by bit 7 of L0-
CRF0 (FIPURDWN).
8 INcs Track 0. This Schmitt-triggered input from the disk drive is active low
when the head is positioned over the outermost track. This input pin
is pulled up internally by a 1 KΩ resistor, which can be disabled by bit
7 of L0-CRF0 (FIPURDWN).
Publication Release Date: March 1998
-16-
Revision 0.58