English
Language : 

W681307DG Datasheet, PDF (121/160 Pages) Winbond – USB1.1 CODEC Microprocessor Control Unit with 32KB Mask ROM and 4KB RAM.
W681307
14.11
Specific Register
Address
0x150D
Access Mode
R/W
Value At Reset
0x19
Nominal Value
Bit 7
RESERVED
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
RESERVED
Blocked
Blocked
Blocked
Blocked
Blocked
Blocked
(for test modes) (for test modes) (for test modes) (for test modes) (for test modes) (for test modes)
14.12
EnAllClock
Address
0x150E
Access Mode
R/W
Value At Reset
0x00
Nominal Value
Bit 7
Bit 6
SpeedUp32K RESERVED
Bit 5
RESERVED
Bit 4
RESERVED
Bit 3
Dump mask
Rom
Bit 2
Bit 1
8032 clk output Read MASK
selection ROM Enable
Bit 0
EnAllClock
EnAllClock
Read Mask ROM Enable
8032 clk output selection
Dump mask Rom
SpeedUp32K
when set, most of the clocks will be enabled.
when set, enable read_access for MASK ROM
when set, P1.4 will output system clock used by on chip TB8032. If chip is configured as double system
clock speed, it output the x2 system clock.
when set, enable MASK ROM test mode.
when set, 32k clock will replace with 13.824 system clock for speed up testing.
14.13
CODEC_Test_Sel
Address
0x150F
Access Mode Value At Reset Nominal Value
R/W
0x00
Bit 7
codec_test
_sel[7]
Bit 6
codec_test
_sel[6]
Bit 5
codec_test
_sel[5]
Bit 4
codec_test
_sel[4]
Bit 3
codec_test
_sel[3]
Bit 2
codec_test
_sel[2]
Codec_test-sel[3:0]
=0001, loopback DA output.
=0010, loopback AD output.
=0011, assign DA output to “0”.
=0100, loopback DA input.
=0101, test ALU function.
=0110, set value to internal register D2.
=0111, calculate checksum of code ROM.
=1000, calculate checksum of coefficient ROM.
=1001, route external input (pDR) to AD input.
=1010, output code ROM content.
=1011, output coefficient ROM content.
Codec_test-sel[7:4]
=0001, 1-bit AD input.
=0010, ADC FIFO pointer.
=0011, ADC 1st -stage SINC filter output.
=0100, ADC 2nd –stage SINC filter output.
=0101, ADC LPF output.
=0110, ADC HPF output.
=0111, ADC output.
=1000, DAC input.
=1001, DAC 1st –stage SINC filter output.
=1010, DAC LPF output
- 121 -
Bit 1
codec_test
_sel[1]
Bit 0
codec_test
_sel[0]
Publication Release Date: May, 2007
Revision 1.3