CC2510F16 Datasheet, PDF (96/244 Pages) Texas Instruments – Low-Power SoC (System-on-Chip) with MCU, Memory, 2.4 GHz RF Transceiver, and USB Controller

CC2510Fx / CC2511Fx
P2INP (0xF7) - Port 2 Input Mode
Bit Field Name
7
PDUP2
Reset R/W
0
R/W
6
PDUP1
0
R/W
5
PDUP0
0
R/W
4:0 MDP2_[4:0]
00000 R/W
Description
Port 2 pull-up/down select. Selects function for all Port 2 pins configured as
pull-up/pull-down inputs.
0 Pull-up
1 Pull-down
Port 1 pull-up/down select. Selects function for all Port 1 pins configured as
pull-up/pull-down inputs, except for P1_0 and P1_1, which do not have pull-
up/down capability.
0 Pull-up
1 Pull-down
Port 0 pull-up/down select. Selects function for all Port 0 pins configured as
pull-up/pull-down inputs.
0 Pull-up
1 Pull-down
P2_4 to P2_0 I/O input mode
0 Pull-up / pull-down
1 Tristate
P0IFG (0x89) - Port 0 Interrupt Status Flag
CC2510Fx
Bit Field Name
7:0 P0IF[7:0]
Reset
0x00
R/W
R/W0
Description
Port 0, inputs 7 to 0 interrupt status flags.
0 No interrupt pending
1 Interrupt pending
CC2511Fx
Bit Field Name
7
USB_RESUME
6
5:0 P0IF[5:0]
Reset
0
0
0
R/W
R/W0
R/W0
R/W0
Description
USB resume detected during suspend mode
Not used
Port 0, inputs 5 to 0 interrupt status flags.
0 No interrupt pending
1 Interrupt pending
P1IFG (0x8A) - Port 1 Interrupt Status Flag
Bit Field Name
7:0 P1IF[7:0]
Reset
0x00
R/W
R/W0
Description
Port 1, inputs 7 to 0 interrupt status flags.
0 No interrupt pending
1 Interrupt pending
P2IFG (0x8B) - Port 2 Interrupt Status Flag
Bit Field Name
7:5
4:0 P2IF[4:0]
Reset
-
0
R/W
R0
R/W0
Description
Not used
Port 2, inputs 4 to 0 interrupt status flags.
0 No interrupt pending
1 Interrupt pending
SWRS055F
Page 96 of 241