CC2510F16 Datasheet, PDF (120/244 Pages) Texas Instruments – Low-Power SoC (System-on-Chip) with MCU, Memory, 2.4 GHz RF Transceiver, and USB Controller

CC2510Fx / CC2511Fx
T1CCTL2 (0xE7) - Timer 1 Channel 2 Capture/Compare Control
Bit Field Name Reset R/W Description
7
CPSEL
0
R/W Timer 1 channel 2 capture select
0
Use normal capture input
1
Use RF event(s) enabled in the RFIM register to trigger a capture
6
IM
1
R/W Channel 2 interrupt mask
0
Interrupt disabled
1
Interrupt enabled
5:3 CMP[2:0]
000
R/W Channel 2 compare mode select. Selects action on output when timer value equals
compare value in T1CC2
000 Set output on compare
001 Clear output on compare
010 Toggle output on compare
011 Set output on compare-up, clear on 0 (clear on compare-down in up/down
mode)
100 Clear output on compare-up, set on 0 (set on compare-down in up/down
mode)
101 Set when equal to T1CC2, clear when equal to T1CC0
110 Clear when equal to T1CC2, set when equal to T1CC0
111 Not used
2
MODE
0
R/W Mode. Select Timer 1 channel 2 capture or compare mode
0
Capture mode
1
Compare mode
1:0 CAP[1:0]
00
R/W Channel 2 capture mode select
00 No capture
01 Capture on rising edge
10 Capture on falling edge
11 Capture on both edges
T1CC2H (0xDF) - Timer 1 Channel 2 Capture/Compare Value High
Bit Field Name Reset R/W Description
7:0 T1CC2[15:8] 0x00 R/W Timer 1 channel 2 capture/compare value, high order byte
T1CC2L (0xDE) - Timer 1 Channel 2 Capture/Compare Value Low
Bit Field Name Reset R/W Description
7:0 T1CC2[7:0] 0x00 R/W Timer 1 channel 2 capture/compare value, low order byte
SWRS055F
Page 120 of 241