LM3S5C36 Datasheet, PDF (954/1068 Pages) Texas Instruments – Stellaris® LM3S5C36 Microcontroller

Pulse Width Modulator (PWM)
Bit/Field
6
5
4
3
Name
DCMP6
DCMP5
DCMP4
DCMP3
Type
-
-
-
-
Reset
0
Description
Digital Comparator 6 Trigger
If the PWMnCTL register LATCH bit is clear, this bit represents the
current state of the Digital Comparator 6 trigger input.
If the PWMnCTL register LATCH bit is set, this bit represents a sticky
version of the trigger.
■ If DCMP6 is set, the trigger transitioned to the active state previously.
■ If DCMP6 is clear, the trigger has not transitioned to the active state
since the last time it was cleared.
■ The DCMP6 bit is cleared by writing it with the value 1.
0
Digital Comparator 5 Trigger
If the PWMnCTL register LATCH bit is clear, this bit represents the
current state of the Digital Comparator 5 trigger input.
If the PWMnCTL register LATCH bit is set, this bit represents a sticky
version of the trigger.
■ If DCMP5 is set, the trigger transitioned to the active state previously.
■ If DCMP5 is clear, the trigger has not transitioned to the active state
since the last time it was cleared.
■ The DCMP5 bit is cleared by writing it with the value 1.
0
Digital Comparator 4 Trigger
If the PWMnCTL register LATCH bit is clear, this bit represents the
current state of the Digital Comparator 4 trigger input.
If the PWMnCTL register LATCH bit is set, this bit represents a sticky
version of the trigger.
■ If DCMP4 is set, the trigger transitioned to the active state previously.
■ If DCMP4 is clear, the trigger has not transitioned to the active state
since the last time it was cleared.
■ The DCMP4 bit is cleared by writing it with the value 1.
0
Digital Comparator 3 Trigger
If the PWMnCTL register LATCH bit is clear, this bit represents the
current state of the Digital Comparator 3 trigger input.
If the PWMnCTL register LATCH bit is set, this bit represents a sticky
version of the trigger.
■ If DCMP3 is set, the trigger transitioned to the active state previously.
■ If DCMP3 is clear, the trigger has not transitioned to the active state
since the last time it was cleared.
■ The DCMP3 bit is cleared by writing it with the value 1.
954
January 23, 2012
Texas Instruments-Production Data