LM3S5C36 Datasheet, PDF (482/1068 Pages) Texas Instruments – Stellaris® LM3S5C36 Microcontroller

General-Purpose Timers
Register 3: GPTM Timer B Mode (GPTMTBMR), offset 0x008
This register configures the GPTM based on the configuration selected in the GPTMCFG register.
When in PWM mode, set the TBAMS bit, clear the TBCMR bit, and configure the TBMR field to 0x1 or
0x2.
This register controls the modes for Timer B when it is used individually. When Timer A and Timer
B are concatenated, this register is ignored and GPTMTBMR controls the modes for both Timer A
and Timer B.
Important: Bits in this register should only be changed when the TBEN bit in the GPTMCTL register
is cleared.
GPTM Timer B Mode (GPTMTBMR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x008
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
reserved
Type RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
Reset
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
reserved
TBSNAPS TBWOT TBMIE TBCDIR TBAMS TBCMR
TBMR
Type RO
RO
RO
RO
RO
RO
RO
RO
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit/Field
31:8
7
Name
reserved
TBSNAPS
Type
RO
R/W
Reset Description
0x0000.00 Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
GPTM Timer B Snap-Shot Mode
Value Description
0 Snap-shot mode is disabled.
1 If Timer B is configured in the periodic mode, the actual
free-running value of Timer B is loaded at the time-out event
into the GPTM Timer B (GPTMTBR) register. If the timer
prescaler is used, the prescaler snapshot is loaded into the
GPTM Timer B (GPTMTBPR).
6
TBWOT
R/W
0
GPTM Timer B Wait-on-Trigger
Value Description
0 Timer B begins counting as soon as it is enabled.
1 If Timer B is enabled (TBEN is set in the GPTMCTL register),
Timer B does not begin counting until it receives an it receives
a trigger from the timer in the previous position in the daisy
chain, see Figure 10-2 on page 468. This function is valid for
both one-shot and periodic modes.
482
January 23, 2012
Texas Instruments-Production Data