TLK110 Datasheet, PDF (90/104 Pages) Texas Instruments – Industrial Temp, Single Port 10/100Mbs Ethernet Physical Layer

TLK110
SLLS901A – DECEMBER 2011 – REVISED FEBRUARY 2012
9.6.13 10Base-T Transmit Timing (Start of Packet)
www.ti.com
Table 9-13. 10Base-T Transmit Timing (Start of Packet)
PARAMETER
TEST CONDITIONS
MIN
t₁
Transmit Output Delay from the Falling Edge of TX_CLK 10Mbs MII mode
(1) (1) 1 bit time = 100ns in 10Mb/s.
TYP MAX UNIT⁽¹⁾
5.8
bits
TX_CLK
TX_EN
TXD
t₁
PMD Output Pair
Figure 9-13. 10Base-T Transmit Timing (Start of Packet)
9.6.14 10Base-T Transmit Timing (End of Packet)
Table 9-14. 10Base-T Transmit Timing (End of Packet)
PARAMETER
t₁
End of Packet High Time (with ‘0’ ending bit)
t₂
End of Packet High Time (with ‘1’ ending bit)
TEST CONDITIONS
MIN TYP MAX UNIT
250 310
ns
250 310
ns
TX_CLK
TX_EN
t₁
PMD Output Pair
0
0
PMD Output Pair
t₂
1
1
Figure 9-14. 10Base-T Transmit Timing (End of Packet)
90
Electrical Specifications
Submit Documentation Feedback
Product Folder Link(s): TLK110
Copyright © 2011–2012, Texas Instruments Incorporated